Black & Decker ET1255, ET1265, 388268, ET1275 General Safety Rules, Work Area, Electrical Safety

Page 4

Snap-on Drill 11/12/03 8:47 AM Page 4

English

General Safety Rules

WARNING! Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS

WORK AREA

Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adaptor plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If the tools should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user.

Double insulated tools are equipped with a polarized plug (one blade is wider than the other.) This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified

electrician to install a polarized outlet. Do not change the plug

in any way. Double insulation eliminates the need for the three wire grounded power cord and grounded power supply system.

Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded.

Don’t expose power tools to rain or wet conditions. Water

entering a power tool will increase the risk of electric shock.

Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.

When operating a power tool outside, use an outdoor extension cord marked “W-A” or “W.” These cords are rated for outdoor use and reduce the risk of electric shock. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. The following table shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next

heavier gage. The smaller the gage number, the heavier the cord.

 

 

 

Minimum Gage for Cord Sets

 

 

 

Volts

 

Total Length of Cord in Feet

 

 

 

120V

 

0-25

26-50

51-100

101-150

 

 

240V

 

0-50

51-100

101-200

201-300

 

 

Ampere Rating

 

AWG

 

 

 

 

More

Not more

 

 

 

 

 

Than

Than

 

 

 

 

 

0

-

6

18

16

16

14

 

6

-

10

18

16

14

12

 

10

-

12

16

16

14

12

 

12

-

16

14

12

Not Recommended

 

 

 

 

 

 

 

 

 

PERSONAL SAFETY

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury,

Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothing, jewelry, or long hair can be caught in moving parts.

Avoid accidental starting. Be sure switch is off before

Image 4
Contents Snap-on Drill 11/12/03 847 AM Snap-on Drill 11/12/03 847 AM VSR Drill Electrical Safety General Safety RulesWork Area Additional Safety Rules Switch Motor BrushesOperation Accessories Side Handle MaintenanceFull Warranty Keyed ChucksAire DE Travail Sécurité ÉlectriqueUtilisation ET Entretien DES Outils Sécurité DES PersonnesRéparation Balais du moteur Mesures de sécurité additionnellesInterrupteur Fonctionnement PerçageMandrins à clé Mandrins sans cléPerçage dans le métal Perçage dans le boisAccessoires Perçage dans la maçonneriePoignée latérale EntretienReglas generales de seguridad Area DE TrabajoSeguridad Electrica Seguridad PersonalUSO Y Cuidados DE LA Herramienta Reglas adicionales de seguridadServicio Interruptores Carbones del motorBoton DE Encendido Permanente Operación Para TaladrarPortabrocas con llave Taladrado en metalTaladrado en madera Taladrado en mamposteríaMantenimiento AccesoriosImportante Garantía CompletaEspañol

ET1255, 388268, ET1245, ET1275, ET1265 specifications

Black & Decker is renowned for its commitment to innovation and quality, offering a variety of power tools that cater to both professional tradespeople and DIY enthusiasts. Among its extensive line of products, the Black & Decker ET1265, ET1275, ET1245, ET1255, and the 388268 models stand out for their exceptional features and performance.

The Black & Decker ET1265 is a versatile electric trimmer designed for precision and ease of use. It features a lightweight and ergonomic design, enabling users to maneuver it effortlessly while trimming edges around flower beds and pathways. Its powerful motor provides sufficient power to tackle tough vegetation, while the adjustable cutting width allows the user to customize the tool for different applications.

Similarly, the ET1275 model follows the same user-centric philosophy but adds enhanced cutting technology. It boasts a dual-line system, providing a cleaner and faster cut. The automatic feed spool ensures that the trimmer line is always at the optimal length without the hassle of manual adjustments. This feature enhances efficiency, making yard work less time-consuming.

The ET1245 model is ideal for those who need a compact and lightweight option. Despite its smaller size, it does not compromise on power. This model is particularly beneficial for trimming in tight spaces and intricate landscaping designs. It includes a telescoping shaft for added comfort, allowing users to adjust the height based on their preference.

The ET1255 model incorporates a unique pivoting head, enabling users to easily switch from trimming to edging. This versatile feature means that homeowners can achieve professional results without the need for multiple tools, saving both time and money. With its durable construction, it is built to withstand rigorous use for years.

Lastly, the 388268 model stands out as a heavy-duty option. It features advanced motor technology that optimizes power usage while maximizing performance. This model is designed for users who frequently tackle larger or tougher landscaping tasks, providing reliability and efficiency.

In summary, Black & Decker’s line of trimmers, including the ET1265, ET1275, ET1245, ET1255, and 388268, embodies the brand's dedication to quality and user-friendly design. Each model brings distinct features and enhancements tailored to different needs, ensuring that any user can find the right tool to maintain a beautiful landscape. These innovations and characteristics make Black & Decker a trusted choice for outdoor power tools.