Black & Decker ET1265, 388268, ET1275, ET1245, ET1255 manual Additional Safety Rules

Page 5

Snap-on Drill 11/12/03 8:47 AM Page 1

plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents.

•Remove adjusting keys or switches before turning the tool on. A wrench or key that is left attached to a rotating part of the tool may result in personal injury.

•Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

•Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

TOOL USE AND CARE

•Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

•Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

•Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired.

•Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the tool. Such preventative safety measures reduce the risk of starting the tool accidentally.

•Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

•Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools, with sharp cutting edges are less likely to bind and are easier to control.

•Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tools operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

1

•Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool, may become hazardous when used on another tool.

SERVICE

•Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.

•When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of electric shock or injury.

Additional Safety Rules

•Hold tool by insulated gripping surfaces when performing an operation where the cutting tools may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.

•Keep handles dry, clean, free from oil and grease. It is recommended to use rubber gloves. This will enable better control

•DO NOT TOUCH ANY METAL PARTS OF THE TOOL when drilling or driving into walls, floors or wherever live electrical wires may be encountered. Hold the tool only by insulated grasping surfaces to prevent electric shock if you drill or drive into a live wire.

CAUTION: Wear appropriate personal hearing protection during use. Under some conditions and duration of use, noise from this product may contribute to hearing loss.

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•lead from lead-based paints,

•crystalline silica from bricks and cement and other masonry products, and

English

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Snap-on Drill 11/12/03 847 AM Snap-on Drill 11/12/03 847 AM VSR Drill Work Area General Safety RulesElectrical Safety Additional Safety Rules Motor Brushes SwitchOperation Side Handle Maintenance AccessoriesFull Warranty Keyed ChucksSécurité Électrique Aire DE TravailRéparation Sécurité DES PersonnesUtilisation ET Entretien DES Outils Interrupteur Mesures de sécurité additionnellesBalais du moteur Perçage FonctionnementMandrins sans clé Mandrins à cléPerçage dans le métal Perçage dans le boisPerçage dans la maçonnerie AccessoiresPoignée latérale EntretienArea DE Trabajo Reglas generales de seguridadSeguridad Electrica Seguridad PersonalServicio Reglas adicionales de seguridadUSO Y Cuidados DE LA Herramienta Boton DE Encendido Permanente Carbones del motorInterruptores Para Taladrar OperaciónTaladrado en metal Portabrocas con llaveTaladrado en madera Taladrado en mamposteríaAccesorios MantenimientoImportante Garantía CompletaEspañol

ET1255, 388268, ET1245, ET1275, ET1265 specifications

Black & Decker is renowned for its commitment to innovation and quality, offering a variety of power tools that cater to both professional tradespeople and DIY enthusiasts. Among its extensive line of products, the Black & Decker ET1265, ET1275, ET1245, ET1255, and the 388268 models stand out for their exceptional features and performance.

The Black & Decker ET1265 is a versatile electric trimmer designed for precision and ease of use. It features a lightweight and ergonomic design, enabling users to maneuver it effortlessly while trimming edges around flower beds and pathways. Its powerful motor provides sufficient power to tackle tough vegetation, while the adjustable cutting width allows the user to customize the tool for different applications.

Similarly, the ET1275 model follows the same user-centric philosophy but adds enhanced cutting technology. It boasts a dual-line system, providing a cleaner and faster cut. The automatic feed spool ensures that the trimmer line is always at the optimal length without the hassle of manual adjustments. This feature enhances efficiency, making yard work less time-consuming.

The ET1245 model is ideal for those who need a compact and lightweight option. Despite its smaller size, it does not compromise on power. This model is particularly beneficial for trimming in tight spaces and intricate landscaping designs. It includes a telescoping shaft for added comfort, allowing users to adjust the height based on their preference.

The ET1255 model incorporates a unique pivoting head, enabling users to easily switch from trimming to edging. This versatile feature means that homeowners can achieve professional results without the need for multiple tools, saving both time and money. With its durable construction, it is built to withstand rigorous use for years.

Lastly, the 388268 model stands out as a heavy-duty option. It features advanced motor technology that optimizes power usage while maximizing performance. This model is designed for users who frequently tackle larger or tougher landscaping tasks, providing reliability and efficiency.

In summary, Black & Decker’s line of trimmers, including the ET1265, ET1275, ET1245, ET1255, and 388268, embodies the brand's dedication to quality and user-friendly design. Each model brings distinct features and enhancements tailored to different needs, ensuring that any user can find the right tool to maintain a beautiful landscape. These innovations and characteristics make Black & Decker a trusted choice for outdoor power tools.
Top Page Image Contents