Black & Decker ET1245, ET1265 Keyed Chucks, Keyless Chucks, Accessories, Side Handle Maintenance

Page 8

Snap-on Drill 11/12/03 8:47 AM Page 4

English

Keyed Chucks

Open chuck jaws by turning collar with fingers and insert shank of bit about 3/4" into chuck. Tighten chuck collar by hand. Place chuck key in each of the three holes, and tighten in CLOCKWISE direction. It’s important to tighten chuck with all three holes to prevent slippage. To release bit, turn chuck key COUNTERCLOCKWISE in just one hole, then loosen the chuck by hand. Any authorized Snap-on service center can install a keyless chuck in place of a keyed chuck.

Keyless Chucks

Open chuck jaws by turning plastic collar with fingers and insert shank of bit about 3/4" into chuck. Tighten plastic collar CLOCKWISE while depressing spindle lock button on the right side of the tool housing (Fig. 4). To release bit, turn plastic collar COUN- TERCLOCKWISE while depressing the spindle lock button (Fig. 4).

NOTE: DO NOT DEPRESS LOCK BUTTON WHILE OPERATING DRILL or while the chuck is moving.

Accessories

Recommended accessories for use with your tool are available at extra cost from your distributor or local service center.

ACCESSORY MUST BE RATED FOR USE AT SPEED EQUAL TO OR HIGHER THAN NAMEPLATE R.P.M. OF TOOL WITH WHICH IT IS BEING USED.

If you need assistance in locating any accessory, please contact Snap-on Tools Corporation, Kenosha, WI 53141-1410.

CAUTION: The use of any non-recommended accessory may be hazardous.

Important

To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (including brush inspection and replacement) should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts.

Side Handle

CAUTION: Always use side handle and hold drill with both hands. A side handle is supplied with your drill. It clamps to the front of the gear case and can be rotated 360 degrees to permit right or left hand use.

Maintenance

Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

Self-lubricating bearings are used in the tool and periodic relubrication is not required. In the unlikely event that service is ever needed, take your tool to an authorized service location.

Full Warranty

Snap-on heavy duty industrial tools are warranted for one year from date of purchase. We will repair, without charge, any defects due to faulty materials or workmanship. This warranty does not apply to accessories or damage caused where repairs have been made or attempted by others. This warranty gives you specific legal rights and you may have other rights which vary in certain states or provinces.

In addition to the warranty, Snap-on tools are covered by our:

30 DAY NO RISK SATISFACTION GUARANTEE

If you are not completely satisfied with the performance of your Snap- on heavy duty industrial tool, simply return it to the participating seller within 30 days for a full refund. Please return the complete unit, transportation prepaid. Proof of purchase may be required.

4

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Snap-on Drill 11/12/03 847 AM Snap-on Drill 11/12/03 847 AM VSR Drill Work Area General Safety RulesElectrical Safety Additional Safety Rules Switch Motor BrushesOperation Accessories Side Handle MaintenanceFull Warranty Keyed ChucksAire DE Travail Sécurité ÉlectriqueRéparation Sécurité DES PersonnesUtilisation ET Entretien DES Outils Interrupteur Mesures de sécurité additionnellesBalais du moteur Fonctionnement PerçageMandrins à clé Mandrins sans cléPerçage dans le métal Perçage dans le boisAccessoires Perçage dans la maçonneriePoignée latérale EntretienReglas generales de seguridad Area DE TrabajoSeguridad Electrica Seguridad PersonalServicio Reglas adicionales de seguridadUSO Y Cuidados DE LA Herramienta Boton DE Encendido Permanente Carbones del motorInterruptores Operación Para TaladrarPortabrocas con llave Taladrado en metalTaladrado en madera Taladrado en mamposteríaMantenimiento AccesoriosImportante Garantía CompletaEspañol

ET1255, 388268, ET1245, ET1275, ET1265 specifications

Black & Decker is renowned for its commitment to innovation and quality, offering a variety of power tools that cater to both professional tradespeople and DIY enthusiasts. Among its extensive line of products, the Black & Decker ET1265, ET1275, ET1245, ET1255, and the 388268 models stand out for their exceptional features and performance.

The Black & Decker ET1265 is a versatile electric trimmer designed for precision and ease of use. It features a lightweight and ergonomic design, enabling users to maneuver it effortlessly while trimming edges around flower beds and pathways. Its powerful motor provides sufficient power to tackle tough vegetation, while the adjustable cutting width allows the user to customize the tool for different applications.

Similarly, the ET1275 model follows the same user-centric philosophy but adds enhanced cutting technology. It boasts a dual-line system, providing a cleaner and faster cut. The automatic feed spool ensures that the trimmer line is always at the optimal length without the hassle of manual adjustments. This feature enhances efficiency, making yard work less time-consuming.

The ET1245 model is ideal for those who need a compact and lightweight option. Despite its smaller size, it does not compromise on power. This model is particularly beneficial for trimming in tight spaces and intricate landscaping designs. It includes a telescoping shaft for added comfort, allowing users to adjust the height based on their preference.

The ET1255 model incorporates a unique pivoting head, enabling users to easily switch from trimming to edging. This versatile feature means that homeowners can achieve professional results without the need for multiple tools, saving both time and money. With its durable construction, it is built to withstand rigorous use for years.

Lastly, the 388268 model stands out as a heavy-duty option. It features advanced motor technology that optimizes power usage while maximizing performance. This model is designed for users who frequently tackle larger or tougher landscaping tasks, providing reliability and efficiency.

In summary, Black & Decker’s line of trimmers, including the ET1265, ET1275, ET1245, ET1255, and 388268, embodies the brand's dedication to quality and user-friendly design. Each model brings distinct features and enhancements tailored to different needs, ensuring that any user can find the right tool to maintain a beautiful landscape. These innovations and characteristics make Black & Decker a trusted choice for outdoor power tools.
Top Page Image Contents