Black & Decker DR650, DR350KG, DR550, DR330 instruction manual Operating Instructions

Page 9

638911-00 02 DR drills 3/20/08 10:20 AM Page 9

Operating Instructions

WARNING: To reduce the risk of serious personal injury, read, understand and

follow all safety warnings and instructions prior to using tool.

WARNING: It is important to support the work properly and to hold the drill firmly to prevent loss of control which could cause personal injury. If you have any

questions on how to properly operate tool, call: 1-800-544-6986.

WARNING: Do not attempt to tighten drill bits (or any other accessory) by gripping the front part of the chuck and turning the tool on. Damage to the chuck

and personal injury may occur when changing accessories.

WARNING: To reduce the risk of injury, always unplug drill from power supply before making any adjustments or changing accessories.

WARNING: To reduce the risk of injury, let the tool work at its own pace. Do not overload.

Selecting the direction of rotation (DR250, DR320KG, DR330, DR650)

For drilling and for tightening screws, use forward (clockwise) rotation. For loosening screws or removing a jammed drill bit, use reverse (counterclockwise) rotation. Note: The direction of rotation is also depicted by an arrow on the drill housing.

WARNING: Never change the direction of rotation while the motor is running.

•To select forward rotation, push the forward/reverse slider (3) to the right (when viewed from the chuck end).

•To select reverse rotation, push the forward/reverse slider (3) to the left (when viewed from the chuck end).

Selecting the direction of rotation (DR550)

For drilling and for tightening screws, use forward (clockwise) rotation. For loosening screws or removing a jammed drill bit, use reverse (counterclockwise) rotation.

WARNING:Never change the direction of rotation while the motor is running.

•To select forward rotation, push the forward/reverse slider (3) to the left (when viewed from the chuck end).

•To select reverse rotation, push the forward/reverse slider (3) to the right (when viewed from the chuck end).

Note: The direction of rotation is also depicted by an arrow on the drill housing.

WARNING: Never change the direction of rotation while the motor is running.

Selecting the drilling mode (DR650) (fig. F)

•For drilling in masonry, set the drilling mode selector (5) to the “hammer symbol” (18) position.

•For drilling in other materials and for screwdriving, set the drilling mode selector (5) to the “drill symbol” (19) position.

Two-gear selector (DR650) (fig. G)

•For drilling in steel and for screwdriving applications, turn the two-gear selector (4) into position 1 by aligning the number with the mark on the housing (20) (1st gear). Also when using larger diameter bits in wood turn the two gear selector into position 1.

•For drilling in materials other than steel and when using smaller diameter bits, turn the two-gear selector (4) into position 2 by aligning the number with mark on the housing (20) (2nd gear).

Setting the drilling depth (DR650)

•Slacken the side handle (9) by turning the grip counterclockwise.

•Set the depth stop (8) to the desired position. The maximum drilling depth is equal to the distance between the tip of the drill bit and the front end of the depth stop.

•Tighten the side handle by turning the grip clockwise.

Screwdriving with clutch drill (DR330)

This tool is fitted with a collar to select the operating mode and to set the torque for tightening screws. Large screws and hard workpiece materials require a higher torque setting than small screws and soft workpiece materials.

•For drilling in wood, metal and plastics, set the collar to the drilling position symbol .

•For screwdriving, set the collar to the desired setting. If you do not yet know the appropriate setting, proceed as follows:

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents VEA EL Español EN LA Contraportada Drills & Hammer DrillsSave all warnings and instructions for future reference General Power Tool Safety WarningsSpecific Safety Rules Safety Guidelines Definitions Volts Total Length of Cord in Feet Extension CordsDR650 Assembly Safety Warnings and Instructions DrillsFirst Aid Measures for Gel Components DR320KG Only MotorRemoving and attaching the chuck fig. D Inserting a drill bit or other accessory fig. B & COperating Instructions Plug in drill. Make sure switch turns drill on and off Switching on and offDrilling Drilling In WoodProblem Possible Cause TroubleshootingMaintenance AccessoriesSee ‘Tools Electric’ Yellow Pages For Service Sales Full TWO-YEAR Home USE WarrantyNuméro de catalogue DR250 illustré Mode D’EMPLOI638911-00 02 DR drills 3/20/08 1020 AM 638911-00 02 DR drills 3/20/08 1020 AM Toujours Porter UN Équipement DE Protection Homologué Règles DE Sécurité SpécifiquesRallonges Lignes Directrices EN Matière DE Sécurité DéfinitionsDescription 638911-00 02 DR drills 3/20/08 1020 AM Avertissements de sécurité et directives perceuses Insérer une mèche ou un autre accessoire fig. B et CAssemblage MoteurMandrin sans clé modèle DR250 fig. B Retrait et fixation du mandrin fig. DMandrin et clé modèles DR550 et DR650 fig. C Mandrin sans clé modèles DR250, DR320KG et DR330Fonctionnement Sélection du mode perceuse modèle DR650 fig. FSélection du sens de rotation modèle DR550 Sélecteur à double marche modèle DR650 fig. GVissage avec une perceuse à embrayage modèle DR330 Mise en marche et arrêtPerçage 20/08 1020 AM Information sur les réparations Accessoires555326-7100 638911-00 02 DR drills 3/20/08 1020 AM 638911-00 02 DR drills 3/20/08 1020 AM Normas DE Seguridad Específicas Símbolos Cables prolongadoresDescripción DE LAS Funciones 20/08 1020 AM Ensamblaje Instrucciones y advertencias de seguridad TaladrosAcoplamiento del mango lateral DR550 / DR650 fig. a Inserción de una broca u otro accesorio figuras B y CAcoplamiento y extracción del portabrocas fig. D Instrucciones de operaciónPortabrocas y llave DR550, DR650 fig. C Portabrocas sin llave DR250, DR320KG, DR330Selección del modo de taladrado DR650 fig. F Selección de la dirección de rotación DR550Selector de dos engranajes DR650 fig. G Ajuste de la profundidad de perforación DR650Taladrado Encendido y apagadoTaladrado en madera Taladrado en metalMantenimiento Problema Causa posible Solución posibleAccesorios Capacidades Máximas RecomendadasGUADALAJARA, JAL CULIACAN, SIN MONTERREY, N.LPUEBLA, PUE MEXICO, D.F638911-00 02 DR drills 3/20/08 1020 AM

DR550, DR330, DR350KG, DR650 specifications

The Black & Decker DR series consists of several models designed to cater to a range of needs in the world of power tools. Notably, the DR650, DR350KG, DR330, and DR550 are prominent choices that blend innovation, durability, and efficiency.

Starting with the Black & Decker DR650, this model stands out for its powerful motor that provides reliable performance for a variety of tasks. Its robust design ensures it can handle demanding applications, whether for home improvement or professional use. The DR650 is equipped with advanced features such as variable speed settings, allowing users to adjust the speed according to the specific needs of the task at hand. Additionally, it incorporates an ergonomic handle that enhances grip and reduces fatigue during extended use.

The DR350KG offers a compact yet powerful alternative. Designed for versatility, this model excels in precision tasks, making it ideal for both detailed work and general projects. One of the notable features of the DR350KG is its lightweight design, which enhances maneuverability and makes it easier to handle in tight spaces. Furthermore, this model is engineered with an effective dust management system, helping to maintain a cleaner workspace and ensuring visibility.

In contrast, the Black & Decker DR330 brings a balance of performance and affordability. Targeted towards DIY enthusiasts and occasional users, it features a straightforward operation that makes it user-friendly. The DR330 includes essential features such as a reliable motor and durable construction, all while being budget-friendly. Its versatility allows it to tackle various tasks, from drilling to fastening, making it a practical choice for a wide audience.

Lastly, the DR550 is a powerhouse within the DR lineup. This model is designed for heavy-duty applications, featuring an advanced motor technology that delivers high torque and speed. The DR550 is also equipped with multiple attachments, allowing users to switch between different functions effortlessly. Its integrated safety features and durable build ensure maximum longevity, making it suitable for rigorous use on job sites.

Together, the Black & Decker DR series models – DR650, DR350KG, DR330, and DR550 – highlight a commitment to quality and innovation. Whether users require a powerful tool for professional tasks or a reliable machine for home projects, these models each offer unique characteristics and features tailored to meet diverse needs. With Black & Decker’s reputation for dependable tools, users can trust that each model in this lineup will deliver performance and durability.
Top Page Image Contents