12V MAX* | 9 | 20V MAX** | 9 |
8 | 7 | 7 |
| 8 | |
|
|
|
|
| 10 |
|
|
|
|
| 10 |
|
|
3 | 2 |
| 13 | 6 |
|
|
| 12 |
| 5 | |
|
|
| 11 | ||
|
|
|
| ||
1 |
|
|
|
|
|
|
|
|
| 4 |
|
FUNCTIONAL DESCRIPTION |
|
|
|
| |
1. 12v | Max* battery charger | 6. 20v Max** battery release button | 11. Drill/screwdriver attachment | ||
2. 12v | Max* battery | 7. | Forward/reverse slider | 12. Keyless chuck |
|
3. 12v Max* battery release button | 8. | Variable speed trigger | 13. Torque adjustment collar | ||
4. 20v | Max** battery charger | 9. | Attachment release button |
|
|
5. 20v | Max** battery | 10. Bit holder | |||
IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CHARGERS
SAVE THESE INSTRUCTIONS: This manual contains important safety instructions for battery chargers.
%HIRUHXVLQJFK UJHUUH G OOLQVWUXFWLRQV QGF XWLRQ U\P UNLQJVRQFK UJHU WWHU\S FN and product using battery pack.
WARNING: Shock hazard. Do not allow any liquid to get inside charger.
CAUTION: Burn hazard. To reduce the risk of injury, charge only designated Black
& Decker batteries. Other types of batteries may burst causing personal injury and damage.
CAUTION: Under certain conditions, with the charger plugged in to the power supply, the charger can be shorted by foreign material. Foreign materials of a conductive nature such as, but not limited to, steel wool, aluminum foil, or any buildup of metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug charger before attempting to clean.
WARNING:
DO NOT attempt to charge the battery pack with any chargers other than the ones in this manual. The charger and battery pack are specidesigned to work together.
These chargers are not intended for any uses other than charging designated Black & Decker rechargeable batteries. Any other uses may result in risk of re, electric shock or electrocution.
Do not expose charger to rain or snow.
Pull by plug rather than cord when disconnecting charger. This will reduce risk of damage
to electric plug and cord.
Make sure that cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
5