Keep your hair, clothing, and gloves away from air vents. Air vents often cover moving parts in which these items can be caught.
Hold tool rmly with two hands, one hand on the handle, and the other gripping the bottom around the battery area. Use auxiliary handle if provided. Loss of control can cause personal injury.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
OH GIURPOH G VHGS LQWV
FU\VW OOLQHVLOLF IURP ULFNV QGFHPHQW QGRWKHUP VRQU\SURGXFWV QG
UVHQLF QGFKURPLXPIURPFKHPLF OO\WUH WHGOXP HU
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities. Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals.
WARNING: Use of this tool can generate and/or disperse dust, which may cause serious
and permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory protection appropriate for the dust exposure. Direct particles away from face and body.
Wear appropriate hearing protection during use. Under some conditions and duration of use, noise from this product may contribute to hearing loss.
WARNING: ALWAYS use safety glasses. Everyday eye glasses are NOT safety glasses. Also use face or dust mask if cutting operation is dusty.
ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:
ANSI Z87.1 eye protection (CAN/CPA Z94.3), ANSI S12.6 (S3.19) hearing protection, NOSH/OSHA respiratory protection.
SYMBOLS
The label on your tool may include the following symbols. The symbols and their definitions are as follows:
V | volts | A | amperes | ||||||||
Hz | hertz | W | watts | ||||||||
min | minutes |
|
|
| ................ | alternating current | |||||
|
|
|
|
|
| direct current | no | no load speed | |||
|
|
|
|
|
| ||||||
|
|
|
|
| ................ |
|
|
| .................. | ||
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
| (grounded) |
|
|
| ................ | safety alert symbol |
|
|
|
|
| ................ | Class II Construction | .../min or rpm... | revolutions or | |||
|
|
|
|
|
| (double insulated) |
|
|
|
| reciprocation per minute |
|
|
|
|
|
| ............Read instruction manual before use |
|
|
| .................. | Use proper respiratory protection |
|
|
|
|
| ................ | Use proper eye protection |
|
|
| .................. | Use proper hearing protection |
These products use the batteries and chargers listed in the chart below.
|
|
|
| |
| Description | Catalog # | ||
|
|
|
|
|
| 12v | Max* Battery: | LB12 / LBX12 | |
| 12v | Max* Battery Charger: | LCS12 |
|
| 20v | Max** | LBXR20 |
|
| 20v | Max** | LB20 / LBX20 |
|
| 20v | Max** | LCS20 |
|
| 2 Amp Fast Charger: | L2AFC |
| |
| 2 Amp Fast Charger: | L2AFCBST |
| |
|
|
|
|
|
4