Power Tool Safety Rules, Work Area | Bosch Power Tools 1033VSR

Power Tool Safety Rules

!WARNING Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS

Work Area

Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

Keep by-standers, children, and visitors away while operating a power tool. Distractions can cause you to lose control.

cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.

When operating a power tool outside, use an outdoor extension cord marked "W-A" or "W." These cords are rated for outdoor use and reduce the risk of electric shock. Refer to “Recommended sizes of Extension Cords” in the Accessory section of this manual.

Electrical Safety

Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adaptor plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If the tools should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user. Improper grounding can shock, burn or electrocute. Grounded tools are equipped with three conductor cord and three prong type plugs. Before plugging in the tool be certain the outlet voltage supplied is within the voltage marked on the nameplate. Do not use “AC only” rated tools with a DC power supply.

Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. If operating the power tool in damp locations is unavoidable, a Ground Fault Circuit Interrupter must be used to supply the power to your tool. Electrician’s rubber gloves and footwear will further enhance your personal safety.

Don't expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

Do not abuse the cord. Never use the

Personal Safety

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. Keep handles dry, clean and free from oil and grease.

Avoid accidental starting. Be sure switch is “OFF” before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch “ON” invites accidents.

Remove adjusting keys or wrenches before turning the tool “ON”. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

-2-

1033VSR, 1013VSR, 1030VSR, 1011VSR, 1012VSR specifications

Bosch Power Tools is renowned for its commitment to quality and innovation in the field of power tools. Among its range, the Bosch 1034VSR, 1012VSR, 1011VSR, 1030VSR, and 1013VSR stand out as versatile and reliable options for both professional contractors and DIY enthusiasts.

The Bosch 1034VSR is a powerful drill featuring an 8 amp motor, providing robust performance for drilling and fastening applications. One of its main features is the variable speed control that allows users to adjust the speed from 0 to 2,600 RPM, which enhances precision in drilling operations. Moreover, the 1034VSR incorporates a dual-mode switch that enables users to switch between hammer drilling and rotation-only modes, making it ideal for various materials, including masonry and wood.

The Bosch 1012VSR offers a slightly lower amp motor, around 7.5 amps, while still delivering reliable performance. This model is designed with a two-speed gearbox that allows users to select high torque for heavy-duty applications or high speed for lighter tasks, making it a versatile choice for different projects. Its lightweight design and ergonomic grip increase comfort during extended use, reducing user fatigue.

Similarly, the Bosch 1011VSR model integrates a 7.5 amp motor, but what sets it apart is its compact size, which enhances maneuverability in tight spaces. This drill features a keyless chuck, simplifying bit changes and enhancing workflow efficiency. Versatile and easy to handle, the 1011VSR is an excellent option for professionals needing a dependable drilling solution in constrained environments.

The Bosch 1030VSR is engineered for demanding applications that require both performance and durability. Boasting an electronic control system, it sustains consistent performance throughout the operation. This model also includes a built-in LED light, illuminating workspaces even in low-light conditions, enhancing safety and accuracy.

Lastly, the Bosch 1013VSR blends performance with convenience. It features a soft-grip handle designed for comfort, allowing users to maintain control during extended use. This drill also includes an integrated depth gauge, facilitating precise drilling depths for accurate installations.

Overall, the Bosch 1034VSR, 1012VSR, 1011VSR, 1030VSR, and 1013VSR are stellar examples of Bosch's dedication to performance, durability, and user-friendly design. With their innovative technologies and features tailored to meet a variety of drilling needs, these tools are excellent additions to any professional or DIY toolkit.