Notes
Notes
Notas
See Warranty on page 5 for important information about commercial use of this product.
DG190300CK | Operating Instructions and Parts Manual | DG190300CKk |
|
| |
|
|
|
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
Hand Drill
BUILT TO LAST
Description
The hand drill is made for drilling, honing, reaming, hole sawing and wire brushing. The drill operates at high speed making the tool useful in drilling metal and pilot holes to reduce wood splitting when installing screws. The keyless chuck provides fast and convenient drill bit changes.
Unpacking
When unpacking this product, carefully inspect for any damage that may have occurred during transit.
General Safety
Information
This manual contains information that is very important to know and understand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols.
Danger indicates
! DANGER an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Warning indicates
! WARNING a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Caution indicates a
! CAUTION potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
NOTICE | Notice indicates | |
important | ||
|
information, that if not followed, may cause damage to equipment.
CALIFORNIA PROPOSITION 65
You can
! DANGER create
dust when you cut, sand, drill or grind materials such as
wood, paint, metal, concrete, cement, or other masonry.
This dust often contains chemicals known to cause cancer, birth defects, or other reproductive harm. Wear protective gear.
! WARNING This product or its power cord contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
The following safety precautions must be followed at all times along with any other existing safety rules.
1. Read all manuals |
|
|
|
included with this |
|
|
|
product carefully. Be |
| MANUAL |
|
thoroughly familiar |
|
|
|
|
|
| |
with the controls and |
|
|
|
|
|
|
the proper use of the equipment.
2.Only persons well acquainted with these rules of safe operation should be allowed to use this tool.
!WARNING Safety
glasses and ear protection must be worn during operation.
3.Do not wear loose fitting clothing, scarves, or neck ties in work area. Loose clothing may become caught in moving parts and result in serious personal injury.
4.Do not wear jewelry when operating any tool. Jewelry may become caught in moving parts and result in serious personal injury.
5.Always use attachments designed for use with this tool. Do not use damaged or worn attachments.
6.Never trigger the tool when not applied to a work object. Attachments must be securely attached. Loose attachments can cause serious injury.
Specifications
Tool |
|
Voltage | 120V 60Hz |
Power Rating | 4 Amp |
No Load Speed | 0 - 2600 rpm |
Chuck Size | 3/8” |
Max Bit Size | 3/8” |
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
© 2006 Campbell Hausfeld/Scott Fetzer | For parts, product & service information | IN713201AV 10/06 |
|
| |
| visit www.chpower.com |
|
16