Campbell Hausfeld DG190300CK specifications General Safety, Information Cont’d, Garantía Limitada

Operating Instructions and Parts Manual

DG190300CK

General Safety

1. Make sure cord is located so that it

will not be stepped on, tripped

control of the tool in unexpected situations.

Para Ordenar Repuestos o Asistencia Técnica, Sírvase Llamar al Distribuidor Más Cercano a Su Domicilio

Information (Cont’d.)

7.	Never point a tool at oneself or any
	other person. Serious injury could
	occur.
8.	Use steady, even pressure when
	using tool. Do not force. Too much
	pressure can cause tool to overheat.
9.	Keep all nuts, bolts and screws tight
	and ensure equipment is in safe
	working condition.

over, or otherwise subjected to

damage or stress.

2. Do not use an extension cord unless

absolutely necessary. Use of

improper extension cord could

result in a risk of fire and electric

shock. If an extension cord must be

used, make sure:

• That the pins on plug of extension

cord are the same number, size and

shape as those of plug.

3. Always work in a well- ventilated area. Wear an OSHA-approved dust mask and safety glasses.

4.Keep hands away from rotating parts.

5.Use clamps or another practical way to secure the workpiece to a stable platform. Never hold work in your hand, lap, or against other parts of your body when operating tool.

Descripción	Número del
	Repuesto
Portabroca sin llave	DG012100PI

Sirvase darnos la siguiente información:

-Número del modelo

-Código impreso

-Descripción y número del repuesto según la lista de repuestos

Dirija toda la correspondencia a:

Campbell Hausfeld

Attn: Customer Service

100 Production Drive

Harrison, OH 45030 U.S.A.

10. Do not put hands near or under

moving parts.

WORK AREA

Do not

! WARNING operate

a power tool in an explosive atmosphere, such as in the presence of flammable

liquids, gases, or dust. Power tools create sparks which may ignite the fumes or dust.

!CAUTION Keep work area clean and well lighted. Cluttered benches and dark areas invite accidents.

!CAUTION Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

Double insulated tools are equiped with a polarized plug (one plug blade is wider that the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, turn the plug over and insert into plug again.

!WARNING Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

!WARNING Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded.

! WARNING Do not abuse cord.

•Never carry tool by its cord.

•Never pull the cord to disconnect from receptacle. Pull plug at outlet.

• That the extension cord is

properly wired and in good

electrical condition.

• If an extension cord is to be used

outdoors it must be marked with

the suffix “W-A” or “W” following

the cord type designation to

indicate it is acceptable for outdoor

use. For example – SJTW-A

3. Do not expose to rain, snow or

frost.

PERSONAL SAFETY

!WARNING Do not misuse this product. Excessive exposure to vibration, work in awkward positions, and repetitive work motions can cause injury to hands and arms. Stop using any tool if discomfort, numbness, tingling, or pain occur, and consult a physician.

1.Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

!CAUTION Avoid accidental starting. Be sure trigger is in the locked or off position before making any adjustments, changing accessories, or storing the tool. Carrying tools with your finger on the trigger with the switch on invites accidents.

2.Do not overreach. Keep

proper footing and balance at all times. Proper footing and balance enable better

TOOL USE AND CARE

!WARNING Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired.

1.This tool must NOT be modified or used for any application other than that for which it was designed.

!CAUTION Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

2.Maintain tools with care.

3.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

4.Use only accessories that are recommended by the manufacturer for your model. Accessories suitable for one tool may create a risk of injury when used on another tool.

5.Some wood contains preservatives which can be toxic. Take extra care to prevent inhalation and skin contact when working with these materials. Request and follow all safety information available from your material supplier.

6.Store tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

Garantía Limitada

1DURACION: A partir de la fecha de compra por el comprador original tal como se especifica a continuación: Un año

2.	QUIEN OTORGA ESTA GARANTIA (EL GARANTE: Campbell Hausfeld / The Scott Fetzer Company 100
	Production Drive, Harrison, Ohio 45030 Teléfono: (800) 543-6400
3.	QUIEN RECIBE ESTA GARANTIA (EL COMPRADOR): El comprador original (que no sea un revendedor) del
	producto Campbell Hausfeld.
4.	PRODUCTOS CUBIERTOS POR ESTA GARANTIA: Cualquier herramienta a motor de Campbell Hausfeld
	proporcionada o fabricada por el garante.
5.	COBERTURA DE LA GARANTIA: Los defectos substanciales de material y fabricación que ocurran dentro del
	período de validez de la garantía.
6.	LO QUE NO ESTA CUBIERTO POR ESTA GARANTIA:
	A.	Las garantías implícitas, incluyendo aquellas de comercialidad E IDONEIDAD PARA FINES
		PARTICULARES, ESTAN LIMITADOS A LO ESPECIFICADO EN EL PARRAFO DE DURACION. Si este producto
		es empleado para uso comercial, industrial o para alquiler, no se aplicará ninguna garantía. En algunos
		estados no se permiten limitaciones a la duración de las garantías implícitas, por lo tanto, en tales casos
		esta limitación no es aplicable.
	B. CUALQUIER PERDIDA DAÑO INCIDENTAL, INDIRECTO O CONSECUENTE QUE PUEDA RESULTAR DE UN
		DEFECTO, FALLA O MALFUNCIONAMIENTO DEL PRODUCTO CAMPBELL HAUSFELD. En algunos estados
		no se permite la exclusión o limitación de daños incidentales o consecuentes, por lo tanto, en tales
		casos esta limitación o exclusión no es aplicable
	C.	Cualquier falla que resulte de un accidente, abuso, negligencia o incumplimiento de las instrucciones de
		funcionamiento y uso indicadas en el (los) manual(es) que se adjunta(n) al producto. Dichos accidentes,
		abusos por parte del comprador, o falta de operar el producto siguiendo las instrucciones del manual
		de instrucciones suministrado también debe incluir la desconexión o modificación de los instrumentos
		de seguridad. Si dichos instrumentos de seguridad son desconectados, la garantía quedaría cancelada.
	D.	Los ajustes normales explicados en el(los) manual(es) suministrado(s) con el producto.
7.	RESPONSABILIDADES DEL GARANTE BAJO ESTA GARANTIA: Reparar o reemplazar, como lo decida el
	Garante, los productos o componentes que estén defectuosos, se hayan dañado o hayan dejado de
	funcionar adecuadamente, durante el período de validez de la garantía
8.	RESPONSABILIDADES DEL COMPRADOR BAJO ESTA GARANTIA:
	A. Suministrar prueba fechada de compra y la historia de mantenimiento del producto.
	B. Entregar o enviar el producto o componente Campbell Hausfeld al Centro de Servicio autorizado
		Campbell Hausfeld más cercano. Los gastos de flete, de haberlos, deben ser pagados por el comprador.
	C. Seguir las instrucciones sobre operación y mantenimiento del producto, tal como se indica(n) en el (los)

Minimum Wire Size (AWG) of Extension Cord
Length of Cord in Feet	25	50	100	150
AWG Size of Cord	18	18	18	16

www.chpower.com

manual(es) del propietario

Esta garantía limitada es válida sólo en los EE.UU., Canadá y México y otorga derechos legales específicos. Usted también puede tener otros derechos que varían de un Estado a otro. o de un país a otro.

2 15 Sp