NETGEAR DGN3500-100NAS user manual V1.0, November

RangeMax Wireless-N DSL Gigabit Modem Router DGN3500 User Manual

•Checking for Firmware Updates screen. After initial configuration, this screen displays unless you previously cleared the Check for Updated Firmware Upon Log-incheck box.

Figure 1-2

Note: If the modem router is not configured (is in its factory default state) when you log in, the Setup Wizard displays. See “Using the Setup Wizard” on page 1-4.

If the modem router discovers a newer version of the firmware, you are asked if you want to upgrade to the new firmware (see “Upgrading the Firmware” on page 4-1for details). If no new firmware is available, the following message displays.

Figure 1-3

•Router Status screen. The Router Status screen displays if the modem router has not been configured yet or has been reset to its factory default settings. See “Viewing Modem Router Status Information” on page 4-4.

You can use the Setup Wizard to automatically detect your Internet connection as described in “Using the Setup Wizard” on page 1-4, or you can bypass the Setup Wizard and manually configure your Internet connection as described in “Viewing or Manually Configuring Your ISP Settings” on page 1-4.

1-3 Connecting Your Router to the Internet

v1.0, November 2009