
RangeMax
Connecting Additional Wireless Client Devices After WPS Setup
You can add more WPS clients to your wireless network, or you can add a combination of WPS- enabled clients and clients without WPS.
Adding More WPS Clients
Note: Your wireless settings remain the same when you add another
To add a wireless client device that is
1.Follow the procedures in “Using a WPS Button to Add a WPS Client” on page
2.To view a list of all devices connected to your modem router (including wireless and Ethernet- connected), see “Viewing a List of Attached Devices” on page
Adding Both WPS and Non-WPS Clients
For
To connect a combination of
1.Configure the network names (SSIDs), select the WPA/PSK + WPA2/PSK radio button on the Wireless Settings screen (see “Manually Configuring Your Wireless Settings” on page
2.On the WPA/PSK + WPA2/PSK screen, select a passphrase and click Apply. Record this information to add additional clients.
3.For the
Configuring Your Wireless Network and Security Settings |