Black Box QuietCab, 12U user manual Bottom Cable Entry

Page 18

Chapter 4: Cable Management

4.2 Bottom Cable Entry

The cabinet has a cable access opening (see Figure 4-1 on the previous page) at the bottom of the enclosure. The cabinet is lined with foam on the top, bottom, and sides to prevent airflow and sound from escaping.

The cable port is large enough to accommodate several hundred Ethernet cables and has a removable top cover. To route the cable out of the cabinet, follow these steps:

1.Loosen the two thumbscrews and remove the rear cable access port top cover.

2.Bring the cable into the cabinet.

3.Put the cover back in place and fasten the two thumbscrews.

Page 18

724-746-5500 blackbox.com

Image 18

Contents Customer Support Information Trademarks Used in this Manual Blackbox.comTrademarks Used in this Manual Normas Oficiales Mexicanas NOM Electrical Safety Statement FCC and IC RFI Statements and NOM StatementNOM Statement NOM Statement Table of Contents Specifications SpecificationsU QuietCab 29.5in 750mm 48.7in 1238 mm 44.6in 1132mm 29.5in 750mm Overview Introduction FeaturesOverview What’s IncludedOverview Accessories Hardware Description Shows the QuietCab components. -2 describes these componentsU, 24U, and 42U QuietCabs’ components Adjusting the Doors Preparing the Cabinet for InstallationPreparing the Cabinet for Installation HandlingCable Management Cable ManagementTop Panel Cable Entry Bottom Cable Entry Installing Equipment in the Cabinet Installing Equipment in the Cabinet Leveling the CabinetAdjusting the Vertical Mounting Rails Bolt Additional Accessories Additional AccessoriesVertical and Horizontal Cable Managers Additional Accessories Filter Package Side filter Front filter Cover Thumbscrews Blackbox.com Blackbox.com Black Box Tech Support FREE! Live /7