Black Box QuietCab, 12U user manual Bolt

Chapter 5: Installing Equipment in the Cabinet

Adjusting the vertical mounting rails on the side braces

WARNING: To avoid personal injury or damage to the enclosure, perform this procedure without any equipment installed on the mounting rails.

1.Use a 10-mm socket (not included) to loosen—but not remove—the bolts in the vertical mounting rails. See Figure 5-2.

	Front	Adjustment
vertical rail			Adjustment
		bolt
			slots

Figure 5-2. Loosen the bolts on the rails.

2. Move the vertical mounting rail to the desired location and tighten the bolts.

Page 20 724-746-5500 blackbox.com