Ryobi P236A General Power Tool Safety Warnings, Work Area Safety, Electrical Safety

Page 2

GENERAL POWER TOOL SAFETY WARNINGS

WARNING

Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains- operated (corded) power tool or battery-operated (cordless) power tool.

WORK AREA SAFETY

Keep work area clean and well lit. Cluttered or dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.

Use battery only with charger listed. For use with 18V nickel-cadmium and 18V lithium-ion battery packs, see tool/appliance/battery pack/charger correlation supplement 987000-432.

PERSONAL SAFETY

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

Do not wear loose clothing or jewelry. Contain long hair. Loose clothes, jewelry, or long hair can be drawn into air vents.

Do not use on a ladder or unstable support. Stable footing on a solid surface enables better control of the power tool in unexpected situations.

POWER TOOL USE AND CARE

Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

2 — English

Image 2
Contents Table of Contents Table DES Matières Índice DE Contenido OPERATOR’S ManualElectrical Safety General Power Tool Safety WarningsWork Area Safety Personal SafetyService Impact Driver Safety WarningsBattery Tool USE and Care Name DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning Operation FeaturesAssembly Driving or Removing Screws INSTALLING/REMOVING Battery PackINSTALLING/REMOVING Bits Language SECTIONS. Figures Illustrations Start onRègles DE Sécurité Relatives AUX Outils Électriques AvertissementDépannage Avertissements DE Sécurité Relatifs CLÉ À ChocsUtilisation ET Entretien DE LA Pile AVERTISSEMENT  SymbolesSymbole Signal Signification NOM Désignation / ExplicationUtilisation CaractéristiquesAssemblage AVERTISSEMENT  INSTALLATION/RETRAIT DU BLOC-PILESINSTALLATION/RETRAIT DES Embouts Vissage ET DévissageSeguridad Eléctrica AdvertenciaSeguridad EN EL Área DE Trabajo Seguridad PersonalEmpleo Y Cuidado DE LA Herramienta DE Baterías ServicioAdvertencia SímbolosPeligro PrecauciónFuncionamiento CaracterísticasArmado Instalación / Desmontar DE LAS Brocas Enroscado Y Desenroscado DE TornillosINSTALACIÓN/DESMONTAR DEL Paquete DE Baterías Mantenimiento MaintenanceEntretien California Propuesta DE LEY NÚM Advertencia California PropositionProposition 65 DE L’ÉTAT DE Californie Avertissement P236A OPERATOR’S MANUAL/IMPACT Driver ONE World TECHNOLOGIES, INC