SPECIFICATIONS:
|
| CTH1202K2 | CTH1442K2 | CTH1802 |
|
| Chuck | 3/8 in. Keyless | 3/8 in. Keyless | 1/2 in. Keyless |
|
|
|
|
|
|
|
| Motor | DC Motor 12.0 V | DC Motor 14.4 V | DC Motor 18.0 V |
|
|
|
|
|
|
|
| Gear Train |
| |||
|
|
|
|
|
|
| Switch | Variable Speed | Variable Speed | Variable Speed |
|
|
|
|
|
|
|
| No Load Speed |
| |||
|
|
| |||
| Clutch | 24 Positions | 24 Positions | 24 Positions |
|
|
|
|
|
|
|
| CHARGER | 1400666 | 1400656 | 1400667 |
|
|
|
|
|
|
|
| Input | 120 V, 60 Hz, AC only | 120 V, 60 Hz, AC only | 120 V, 60 Hz, AC only |
|
|
|
|
|
|
|
| Charging Voltage | 12.0 V | 14.4 V | 18.0 V |
|
|
|
|
|
|
|
| Charge Rate | 1 Hour | 1 Hour | 1 Hour |
|
IMPORTANT INFORMATION FOR RECHARGING HOT BATTERIES
When using your
Note: This situation occurs when continuous use of your
occur under normal circumstances. Refer to "Charging Your
DISPOSAL OF THE EXHAUSTED BATTERY
|
| CYC |
|
|
|
| To preserve natural resources, please | ||
| E | L |
|
|
|
| |||
R |
|
|
| E |
|
| recycle or dispose of batteries properly. | ||
R B R C |
|
|
| ||||||
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
| This product contains |
. |
| N i | C d |
|
| 7 | battery. Local, state, or federal laws may | ||
1 |
|
|
|
|
|
| 3 |
|
|
8 |
|
|
|
|
|
|
|
| |
|
|
|
|
| 8 |
|
| ||
0 |
|
|
|
|
| prohibit disposal of | |||
| 0. |
|
| 8 |
|
| |||
| . |
|
|
|
| ||||
|
|
| 8 | 22 |
|
|
|
| batteries in ordinary trash. |
|
|
|
|
|
|
|
|
| |
Consult your local waste authority for information regarding available recycling and/or disposal options.
For more information on battery recycling call
BATTERY.
BATTERY PACK PREPARATION FOR RECYCLING
WARNING:
Upon removal, cover the battery pack's terminals with heavy duty adhesive tape. Do not attempt to destroy or disassemble battery pack or remove any of its components. Also, never touch both terminals with metal objects and/or body parts, as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury.
WARNING:
Do not attempt to disassemble the battery pack. Fire or injury may result.
WARNING:
The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields.
Page 6