Ryobi TS1552DXL manual To Install / Replace the Blade, See Figures 17, Spindle Lock Button, Loosen

Page 18

ASSEMBLY

TO INSTALL / REPLACE THE BLADE

See Figures 17 - 18.

WARNING:

A 12 in. blade is the maximum blade capacity of the saw. Never use a blade that is too thick to allow outer blade washer to engage with the flats on the spindle. Larger blades will come in contact with the blade guards, while thicker blades will prevent the blade bolt from secur- ing the blade on the spindle. Either of these situations could result in a serious accident and can cause serious personal injury.

nUnplug the saw.

nRaise saw arm.

nRotate lower blade guard up and remove screw. Rotate blade bolt cover up and back to expose the blade bolt.

nDepress the spindle lock button and rotate the blade bolt until the spindle locks.

nUsing the wrench provided, loosen and remove the blade bolt.

NOTE: The blade bolt has left hand threads. Turn blade bolt clockwise to loosen.

nRemove outer blade washer (or laser guide). Do not remove inner blade washer.

nWipe a drop of oil onto inner blade washer (or laser guide) and outer blade washer where they contact the blade.

WARNING:

If inner blade washer has been removed, replace it before placing blade on spindle. Failure to do so could cause an accident since blade will not tighten properly.

nFit saw blade inside lower blade guard and onto spindle. The blade teeth point downward at the front of saw as shown in figure 18.

nReplace outer blade washer (or laser guide). Double “D” flats on blade washers align with flats on spindle.

nDepress spindle lock button and replace blade bolt.

NOTE: The blade bolt has left hand threads. Turn blade bolt counterclockwise to tighten.

CAUTION:

Always install the blade with the blade teeth and the arrow printed on the side of the blade pointing down at the front of the saw. The direction of blade rotation is also stamped with an arrow on the upper blade guard.

nTighten blade bolt securely.

nReplace the lower blade guard and blade bolt cover.

nReplace screw and tighten securely.

SPINDLE LOCK

BUTTON

Fig. 17

 

LOWER

SCREW

 

BLADE

 

 

GUARD

 

SHOULDER

BLADE

 

SCREW

 

 

BOLT

 

 

COVER

 

BLADE

 

 

 

 

INNER BLADE

 

 

WASHER WITH

 

 

DOUBLE “D”

TO

 

FLATS

LOOSEN

 

 

TO

 

FLAT(S)

TIGHTEN

 

 

OUTER BLADE WASHER

ON SPINDLE

BLADE

 

WITH DOUBLE “D” FLATS

 

BOLT

 

 

 

 

Fig. 18

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Read ALL InstructionsSpecific Safety Rules Specific Safety Rules Symbols Symbol Name DESIGNATION/EXPLANATIONService Electrical Connection ElectricalDouble Insulation Extension CordsGlossary of Terms Lock Plate FeaturesProduct Specifications Miter Control Lock Handle ARMAMP Motor Switch TriggerKnow Your Compound Miter SAW Blade Wrench StorageTools Needed Nuts Loose Parts ListHEX Work ClampMounting Holes AssemblyUnpacking Trace HolesDust BAG To install the work clampDust Guide Work ClampRear Bracket Table ExtensionsSee Figures 13 Stop Block See Figures 15Stop Block Small Wing Screw Table Base Extension Spindle Lock Button To Install / Replace the BladeSee Figures 17 LoosenLaser Guide Mounting the Laser GuideAligning the Laser Guide Line Blade Wrench Spindle Broken RED LineSquaring the Miter Table to the Fence See Figures 21Squaring the Blade to the Fence See Figures 25Squaring the Blade to the Miter Table See Figures 29To Miter Cross CUT/STRAIGHT CROSS- CUT OperationApplications See Figures 32Work To Bevel CUTSee Figures 34 Bevel Point Scale Work ClampTo Compound Miter CUT 45 X 45 Compound Miter CUT To Support Long WorkpiecesSee Figures 36 Long Workpiece Workpiece SupportsCOMPOUND-ANGLE Settings for Popular Structures Cutting Compound MitersPitch Number of Sides Cutting Crown Molding Laying Molding Flat on the Miter TableSee Figures 40 Cutting Warped MaterialClamping Wide Workpieces WrongBevel Pivot Adjustment AdjustmentsPivot Adjustments Travel Pivot Adjustment Depth Stop AdjustmentsGeneral Maintenance MaintenancePositive Stop Adjustments Brush ReplacementDo not attempt to activate the laser Changing the BatteriesSee Figures 46 Aperture Laser GuidePage Service Model NO. and Serial no

TS1552DXL specifications

The Ryobi TS1552DXL is a highly regarded table saw designed to meet the needs of both DIY enthusiasts and professional carpenters. With a powerful 15-amp motor, this table saw is capable of handling a wide range of cutting tasks, from simple crosscuts to intricate bevel cuts with precision and ease.

One of the standout features of the TS1552DXL is its large 15-inch maximum rip capacity. This allows users to cut larger sheets of material, making it an ideal choice for those working with plywood or large boards. The saw’s adjustable cutting depths and an included miter gauge provide additional versatility, enabling users to make accurate crosscuts and angled cuts up to 60 degrees.

The Ryobi TS1552DXL is equipped with a foldable stand that enhances stability and portability. This convenient feature allows users to set up and store the saw easily, so it can be moved from one job site to another without hassle. The saw also incorporates a heavy-duty steel frame that not only ensures durability but also provides excellent support when working with larger materials.

Safety is a top priority with the Ryobi TS1552DXL. The saw comes with a blade guard that offers protection during operation while maintaining visibility of the cutting area. Additionally, the built-in push stick and safety switch further enhance user safety, making it a great choice for both seasoned professionals and those new to woodworking.

In terms of technology, the Ryobi TS1552DXL features a rack and pinion system for smooth adjustments. This system allows for quick and easy modifications to the blade height and angle, enabling users to achieve precise cuts consistently. The powerful motor, when combined with a high-quality carbide-tipped blade, delivers clean and efficient cuts, reducing the need for excessive sanding or finishing.

Overall, the Ryobi TS1552DXL boasts a range of features, reliable performance, and user-friendly technologies that make it a standout choice in the world of table saws. Whether you are working on small projects at home or tackling larger jobs on the worksite, this saw offers the reliability and precision needed to get the job done efficiently.
Top Page Image Contents