Ryobi TS1552DXL manual Double Insulation, Electrical Connection, Extension Cords, Cord Length

Page 8

ELECTRICAL

DOUBLE INSULATION

Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual three- wire grounded power cord. All exposed metal parts are isolated from the internal metal motor components with protecting insulation. Double insulated tools do not need to be grounded.

WARNING:

The double insulated system is intended to protect the user from shock resulting from a break in the tool’s internal insulation. Observe all normal safety precautions to avoid electrical shock.

NOTE: Servicing of a tool with double insulation requires extreme care and knowledge of the system and should be performed only by a qualified service technician. For service, we suggest you return the tool to the nearest authorized service center for repair. Always use original factory replace- ment parts when servicing.

ELECTRICAL CONNECTION

This tool has a precision-built electric motor. It should be connected to a power supply that is 120 volts, 60 Hz, AC only (normal household current). Do not operate this tool on direct current (DC). A substantial voltage drop will cause a loss of power and the motor will overheat. If your tool does not operate when plugged into an outlet, double-check the power supply.

EXTENSION CORDS

When using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to handle the current the tool will draw. An undersized cord will cause a drop in line voltage, resulting in overheating and loss of power. Use the chart to determine the minimum wire size required in an extension cord. Only round jacketed cords listed by Underwriter’s Laboratories (UL) should be used.

When working outdoors with a tool, use an extension cord that is designed for outside use. This type of cord is designated with “WA” on the cord’s jacket.

Before using any extension cord, inspect it for loose or exposed wires and cut or worn insulation.

**Ampere rating (on tool data plate)

0-2.0 2.1-3.4 3.5-5.0 5.1-7.0 7.1-12.0 12.1-16.0

Cord Length

 

Wire Size (A.W.G.)

 

 

 

 

 

 

 

 

 

25'

16

16

16

16

14

14

 

 

 

 

 

 

 

50'

16

16

16

14

14

12

 

 

 

 

 

 

 

100'

16

16

14

12

10

—

**Used on 12 gauge - 20 amp circuit. NOTE: AWG = American Wire Gauge

WARNING:

Keep the extension cord clear of the working area. Position the cord so that it will not get caught on lumber, tools or other obstructions while you are working with a power tool. Failure to do so can result in serious personal injury.

WARNING:

Check extension cords before each use. If damaged replace immediately. Never use tool with a damaged cord since touching the damaged area could cause electrical shock resulting in serious injury.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Read ALL InstructionsSpecific Safety Rules Specific Safety Rules Symbols Symbol Name DESIGNATION/EXPLANATIONService Electrical Double InsulationElectrical Connection Extension CordsGlossary of Terms Features Product SpecificationsLock Plate Miter Control Lock Handle ARMSwitch Trigger Know Your Compound Miter SAWAMP Motor Blade Wrench StorageTools Needed Loose Parts List HEXNuts Work ClampAssembly UnpackingMounting Holes Trace HolesTo install the work clamp Dust GuideDust BAG Work ClampSee Figures 13 Rear BracketTable Extensions Stop Block Small Wing Screw Table Base Extension Stop BlockSee Figures 15 To Install / Replace the Blade See Figures 17Spindle Lock Button LoosenMounting the Laser Guide Aligning the Laser Guide LineLaser Guide Blade Wrench Spindle Broken RED LineSquaring the Miter Table to the Fence See Figures 21Squaring the Blade to the Fence See Figures 25Squaring the Blade to the Miter Table See Figures 29Operation ApplicationsTo Miter Cross CUT/STRAIGHT CROSS- CUT See Figures 32To Bevel CUT See Figures 34Work Bevel Point Scale Work ClampTo Compound Miter CUT To Support Long Workpieces See Figures 3645 X 45 Compound Miter CUT Long Workpiece Workpiece SupportsPitch Number of Sides COMPOUND-ANGLE Settings for Popular StructuresCutting Compound Miters Cutting Crown Molding Laying Molding Flat on the Miter TableCutting Warped Material Clamping Wide WorkpiecesSee Figures 40 WrongAdjustments Pivot Adjustments Travel Pivot AdjustmentBevel Pivot Adjustment Depth Stop AdjustmentsMaintenance Positive Stop AdjustmentsGeneral Maintenance Brush ReplacementChanging the Batteries See Figures 46Do not attempt to activate the laser Aperture Laser GuidePage Service Model NO. and Serial no

TS1552DXL specifications

The Ryobi TS1552DXL is a highly regarded table saw designed to meet the needs of both DIY enthusiasts and professional carpenters. With a powerful 15-amp motor, this table saw is capable of handling a wide range of cutting tasks, from simple crosscuts to intricate bevel cuts with precision and ease.

One of the standout features of the TS1552DXL is its large 15-inch maximum rip capacity. This allows users to cut larger sheets of material, making it an ideal choice for those working with plywood or large boards. The saw’s adjustable cutting depths and an included miter gauge provide additional versatility, enabling users to make accurate crosscuts and angled cuts up to 60 degrees.

The Ryobi TS1552DXL is equipped with a foldable stand that enhances stability and portability. This convenient feature allows users to set up and store the saw easily, so it can be moved from one job site to another without hassle. The saw also incorporates a heavy-duty steel frame that not only ensures durability but also provides excellent support when working with larger materials.

Safety is a top priority with the Ryobi TS1552DXL. The saw comes with a blade guard that offers protection during operation while maintaining visibility of the cutting area. Additionally, the built-in push stick and safety switch further enhance user safety, making it a great choice for both seasoned professionals and those new to woodworking.

In terms of technology, the Ryobi TS1552DXL features a rack and pinion system for smooth adjustments. This system allows for quick and easy modifications to the blade height and angle, enabling users to achieve precise cuts consistently. The powerful motor, when combined with a high-quality carbide-tipped blade, delivers clean and efficient cuts, reducing the need for excessive sanding or finishing.

Overall, the Ryobi TS1552DXL boasts a range of features, reliable performance, and user-friendly technologies that make it a standout choice in the world of table saws. Whether you are working on small projects at home or tackling larger jobs on the worksite, this saw offers the reliability and precision needed to get the job done efficiently.
Top Page Image Contents