Haier AD36NAHBEA, AD242AHBEA Installation Manual For Electric Wiring, Wiring connection

Installation Manual For Electric Wiring

5. Electric wiring

WARNING

DANGER OF BODILY INJURY OR DEATH

TURN OFF ELECTRIC POWER AT CIRCUIT BREAKER OR POWER SOURCE BEFORE MAKING ANY ELECTRIC CONNECTIONS. GROUND CONNECTIONS MUST BE COMPLETED BEFORE MAKING LINE VOLTAGE CONNECTIONS.

(1)Selection of size of power supply and interconnecting wires. Precautions for Electric wiring

Electric wiring work should be conducted only by authorized personnel.

Do not connect more than three wires to the terminal block. Always use round type crimped terminal lugs with insulated grip on the ends of the wires.

Use copper conductor only.

Select wire sizes and circuit protection from table below. (This table shows 20 m length wires with less than 2% voltage drop.)

Item		Circuit breaker		Power source	Earth leakage breaker
				wire size
	Phase	Switch breaker	Overcurrent protector		Switch	Leak
Model				(minimum)
		(A)	rated capacity (A)	(mm2)	breaker(A*	current(mA)
AD28NAHBEA
AD36NAHBEA	3	30	20	2.5	30	30
AD42NAHBEA
AD52NAHBEA
AD242AHBEA	1	40	26	4.0	40	30
AD28NAHBEA	1	40	30	6.0	40	30

(2)Wiring connection

Make wiring to supply power to the outdoor unit, so that the power for the indoor unit is supplied by terminals.

AD242AHBEA

INDOOR UNIT TERMINAL BLOCK

1 2 3

L N

1 2 3

POWER SUPPLY: 1PH,220-230V~,50Hz

	INDOOR UNIT						1	2	3
AD28NAHBEA	TERMINAL BLOCK
	OUTDOOR UNIT
AD36NAHBEA		R	S	T		N	1	2	3
	TERMINAL BLOCK
AD42NAHBEA
AD52NAHBEA
					POWER SUPPLY:
					380-400V, 3N~,50Hz

21