Installation
NOTE: Unless otherwise stated, mounting hardware is not included.
This section describes the installation and setup of the SM 26 surface mount speaker. Topics include:
•Installating the Speaker Mounting Plate
•Mounting to a Wall Stud
•Yoke Mounting the SM 26
•Attaching a Secondary Support Cable
•Attaching the Speaker to the Mounting Plate
•Setting the Tap Selector Switch (SM 26T Model Only)
•Using the Security Key to Lock and Unlock the Speaker
•Removing the Speaker from the Mounting Plate
Installing the Speaker Mounting Plate
The SM 26 speaker comees with a flat mounting plate and an adapter for positioning the speaker 10° up, down, left, or right.
•0° mounting plate — The flat (0°) mounting plate allows the speaker to be mounted flat on a suitable surface.
•10° mounting adapter — The 10° mounting adapter allows the speaker to be installed at a 10 degreee angle so that the speaker can be pointed up, down, left, or right from an elevated position by rotating the adapter.
10° Mounting Adapter | 0° Mounting Plate |
Figure 2. Mounting Adapter and Mounting Plate
SM 26 Surface Mount Speaker • Installation | 3 |