5.The SM 26 can be mounted with or without the 10° mounting adapter. In either case the wiring of the quick connect contacts remmains the samee, but the wire routing will vary.
Routing the wires without the 10° mounting adapter
Route the speaker cable through the rear of the 0° mounting plate and attach the wire ends to the quick connect contacts using a small screwdriver, as shown below. Be sure to observe the correct polarity.
Quick Connect Contacts
Figure 6. Routing the Wires Without the Mounting Adapter
Red Wire (+) to Next Speaker | Red Wire (+) from Amplifier/Previous Speaker | Black Wire | Black Wire | Red Wire (+) from Amplifier | Black Wire |
LOOP | IN | IN | LOOP |
LOOP | IN | IN |
LOOP
Wire Gauge Table
Number of Wires | Maximum |
per Connection Point | Wire Gauge |
|
|
|
|
1 | 12 AWG |
|
|
2 | 16 AWG |
|
|
4 | 18 AWG |
|
|
Single speaker Connection |
Figure 7. Wiring the Connectors
SM 26 Surface Mount Speaker • Installation | 6 |
