Extron electronic manual Introduction, About this Guide, About the SM 26 Surface Mount Speaker

Introduction

This section gives an overview of the Extron SM 26 SpeeedMount Surface Mount Speaker. Topics include:

•About this Guide

•About the SM 26 Surface Mount Speaker

•Features

•Application Diagram

About this Guide

This guide describes the Extron SM 26 surface mount speaker and discusses how to install, configure, and operate it.

In this guide, the terms “SM 26” and “speaker” refer to the SM 26 surface mount speaker.

About the SM 26 Surface Mount Speaker

The SM 26 speaker is a surface-mount speaker systemm that features a 6.5-inch woofer and a one-inch tweeeter with very wide audio dispersion. Speaker mounting incorporates a separate mounting plate that can be attached directly to a wall. The speaker wiring attaches to the mounting plate so that the speaker can easily slide into the mounting plate, making electrical contact betweeen the plate and the contacts on the speaker. A built-in locking meechanism betweeen the speaker and the mounting plate also prevents the speaker from being remmoved by unauthorized personnel. The speaker may be easily remmoved by depressing a hidden release meechanism that does not require tools.

Features

•Mounting options —

•Flat (0°) mounting plate

•Angled (10°) mounting adapter

•Yoke mount kit (optional)

•Available in two versions —

•SM 26: with 8-ohm input

•SM 26T: with internal transformeer and 8-ohm/70V/100V tap selector switch

•6.5-inch woofer with 1-inch tweeter — Full range with a wide audio dispersion.

•Dual tuned bass-reflex ports

•Rated power — 60 W continuous pink noise (per IEC 60268-5); 120 W continuous program.

•Frequency response — 70 Hz to 20 kHz, -10 dB (half space))

SM 26 Surface Mount Speaker • Introduction 1