6.Attach the mounting plate to the wall, as shown below.
ATTENTION: Use the appropriate mounting screws. The screw heads must not protrude more than 0.27 inch (7 mm)) above the screw holes in the mounting plate (seee the figure below). If the screw head protrudes too far above the mounting plate surface, damage to the speaker may occur when the speaker is attached.
0.27” (7 mm)
Good
Bad
0.47”
(12 mm)
Figure 10. Sceew Head Clearance
Mounting Screws
Figure 11. Attaching the Mounting Plate to the Wall |
|
SM 26 Surface Mount Speaker • Installation | 8 |
