Installation

If infrared signals from the remote control cannot reach the projector due to excessive

Connecting an External IR

distance or obstructions such as walls or cabinet doors, you can connect an external IR

Receiver

repeater system to the IR INPUT on the LS-10i to extend the range of the remote control.

 

See Figure 3-15.

 

IR Sensor

IR Repeater

(3.5-mm, mini

phono plug)

 

 

6

0

 

2

5

 

 

 

9

1

 

4

8

 

 

3

7

Remote Control

Figure 3-15. External IR Receiver Connection

 

The LS-10i ships with various types of AC power cords. Choose the one that is

Connecting to AC Power

appropriate to your locale.

 

Projector: Plug the female end of one power cord into the AC receptacle on the rear of the LS-10i (AC 100V ~ 240V). Then, connect the other end to your AC power source.

Anamorphic Lens Transport: An AC-to-DC power adapter is provided for the lens transport. Connect the power adapter to the +9V DC In jack on the rear of the lens transport assembly. Connect the other end to an AC power source.

Runco LS-10i Installation/Operation Manual

37

Page 53
Image 53
Runco LS-10I operation manual Connecting an External IR, Receiver, Connecting to AC Power, Appropriate to your locale