Runco LS-10I operation manual 2.Serial Commands continued, msgbox, cal.text1, cal.text2, cal.text3

External Control

Table 6-2. Serial Commands (continued)

Operation Commands Values Notes

msgbox	= ?	0 = On	This control enables or
		1 = Off	disables the display of
			power off, source and
			adjustment message
			boxes (brightness,
			contrast etc.). Default
			value is ON.

cal.text1	=	Up to 30 characters.	The LS-10i start-up
cal.text2			screen is customizable
cal.text3			with three lines of text of
			up to 30 characters each.
			This text appears below
			the “CALIBRATED FOR:”
			text in the logo screen.
			The allowable characters
			are all numbers, letters
			(uppercase and
			lowercase), spaces, and
			symbols available in the
			ASCII code set.

Runco LS-10i Installation/Operation Manual 85