Runco LS-10I 1. LS-10iSpecifications continued, Brightness and Contrast, Limited Warranty

Specifications

Table 7-1. LS-10i Specifications (continued)

Brightness and Contrast:

Weight (without lens): Regulatory Approvals:

Limited Warranty:

Cinema Standards Measurement System (CSMS) Specifications

-Brightness: 119 foot-Lamberts (fL)

-Contrast Ratio: 251:1

These measurements are taken from the projector in a controlled, home theater environment. All measurements are made to ANSI/NAPM IT7.228-1997 specifications using the Photo Research PR-650 SpectraColorimeter and Minolta LS-100 Luminance Meter, Video Essentials test DVD and a 1.3 gain, 72-inch wide screen. The projector is calibrated to a color temperature of 6,500K and has a minimum of 150 hours of usage.

The foot-Lambert (fL) is the unit of measurement used in commercial movie theaters to express image brightness at the screen surface. The Society of Motion Picture and Television Engineers (SMPTE) specifies 16 fL as the target image brightness for film-based projectors using an open gate (without film in the projector). More importantly, today SMPTE specifies 12 fL as the target image brightness in Digital Cinema theaters. The foot-Lambert measurement is dependent on screen size, screen gain and projector light output.

Home Theater Calibration Specifications

-Light Output: 1845 ANSI Lumens

-Contrast Ratio: 251:1

These specifications are obtained by calibrating the projector as described above for CSMS measurements.

Industry-Standard Specifications

-Light Output: 2100 ANSI Lumens

-Contrast Ratio: 10,000:1 full-on, full-off (dynamic)

These are typical projector brightness and contrast specifications found in most companies’ sales literature. Runco includes these measurements in its literature to allow for direct comparison with other manufacturers’ projectors. These measurements are typically taken at 9,000K to 13,000K to get expected performance data when the projector is used in professional, commercial and industrial displays.

40.8 lbs. (18.50 kg)

FCC Part 15 Class B, CE Class B, UL, cUL, CB, RoHS, WEEE, local conformances as required

Projector: Two (2) years parts and labor from the date of shipment from Runco. RuncoCare™ and Runco RedCarpet™ plans are also available.

Lamp: 1000 hours or six (6) months, whichever comes first.

Specifications are subject to change without notice.

Runco LS-10i Installation/Operation Manual 91