Operation
Figure 4-16. PIP Split-Screen Mode
Menu Position: Select Menu Position from the System menu to change the OSD menu position. The default setting is “
“ (top left).
Translucent Menu: Select Translucent Menu from the System menu to adjust the degree of translucence
Lamp Power: Select Lamp Power from the System menu to adjust the lamp output level. You can choose to run the lamp as bright as possible (260W; this is the default setting) or you can choose the Economy (230W) setting. Generally, lower lamp output prolongs the life of the lamp, but decreases brightness. This setting is per source, not global, so it can be saved like other user settings.
Blank Screen: Select Blank Screen from the System menu to choose the color of the blank screen that appears when no source signal is present. The options are Black, Blue and White. The default is Black.
Auto Power Off: Set Auto Power Off to On to have the
Auto Power On: Setting Auto Power On to On causes the projector to automatically power up when AC power is present. If the projector is plugged into a switched AC outlet, this allows the projector to be turned on using a wall switch instead of the remote control unit. If you do not need this capability, set Auto Power On to Off (this is the default).
Rear Projection: This control reverses all images and menus, and is necessary when the projector is used in
Ceiling Mode: This control flips the image so the projector can be used in ceiling mounted installations. The default setting, Auto, automatically determines the orientation using an internal sensor.
Logo Display: This controls whether or not the Runco logo appears during startup.
Power On Chime: This controls the audible chime at startup.
Runco | 65 |
