Runco LS-10I operation manual Operation, Selecting An Input, Source, Selecting An Aspect Ratio 4.3

Operation

4. Operation

When you turn on the LS-10i, it switches to the last selected input and looks for a valid signal.

4.1

Selecting An Input

Use these buttons on the remote control to select an input source directly.

You can assign the HD 1, HD 2 and HD 3 buttons to any input, or to the Picture-in-Picture (PIP) function. The default assignments are: HD 1 = Component 1,

HD 2 = Component 2, HD 3 = RGB.

SOURCE

VID	S-VID	HDMI 1	HDMI 2
HD 1	HD 2	HD 3

Source

For more information, refer to HD 1 Key / HD 2 Key / HD 3 Key on page 66.

Use these buttons to select the appropriate aspect ratio for the type of program material being viewed. Refer to Table 4-2for more information.

Press CUST1, ISF NIGHT, ISF DAY or CUST2 to recall settings from a memory preset. Then, press ENTER to confirm your selection. Or, to cancel the operation, press to select Cancel and press ENTER.

ASPECT RATIO

16:9 4:3 LBOX VWIDE

CINEMA 1 2 VCINE

PICTURE MEMORY

CUST1	ISF	ISF	CUST2
	NIGHT	DAY

ASPECT RATIO

4.2

Selecting An Aspect Ratio

4.3

Selecting Video Memory

Runco LS-10i Installation/Operation Manual 43