Ryobi SC180VS manual Interior Scroll Cutting, Stack Cutting

Page 17

OPERATION

WARNING:

To avoid possible serious injury from accidental starting, always turn the saw off and unplug the saw from power source before removing or replacing the blade.

SCROLL CUTTING

For general type scroll cutting, follow the pattern lines by pushing and turning the workpiece at the same time. Do not try to turn the workpiece while engaged in the blade without pushing it – the workpiece could bind or twist the blade.

WARNING:

To prevent serious personal injury, never leave the saw unattended until the blade has come to a complete stop.

INTERIOR SCROLL CUTTING

See Figure 15.

■One feature of a scroll saw is that it can be used to make scroll cuts on the interior of a workpiece without breaking or cutting through the edge or perimeter of the board.

■To make interior cuts in the workpiece, remove the scroll saw blade as explained in the section on Installing Blades on page 13.

■Drill a 1/4 in. (6 mm) hole in the workpiece.

■Place the workpiece on the saw table with the drilled hole over the access hole in the table.

■Install blade through the hole in the workpiece; adjust the drop foot and blade tension.

■When finished making the interior scroll cuts, simply remove the blade from the blade holders as described in the section on Installing Blades, page 13, and remove the workpiece from the saw table.

STACK CUTTING

See Figure 16.

After becoming well acquainted with your saw through practice and experience, you may wish to try stack cutting. Stack cutting may be used when several identical shapes need to be cut. Several pieces of wood may be stacked on top and secured to each other before cutting. The wood pieces may be joined together by placing double sided tape between each piece or by wrapping masking tape around the corners or ends of the stacked wood. You must attach the stacked pieces of wood to each other so they will move on the table as a single piece of material.

DRILL HOLE

R

INTERIOR

CUT

STORAGE

BLADE

WORKPIECE

Fig. 15

WARNING:

To avoid possible, serious personal injury, do not cut more than one loose piece of material at a time.

WARNING:

Do not allow familiarity with your saw to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury.

R

WOOD

PIECES

ORAGE

TAPE

ST

 

BLA

DE

 

Fig. 16

Page 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Save this Manual for Future Reference Scroll SAW SC180VSIntroduction Table of ContentsProduct Specifications Blade Coasts After Turn OFF Rules for Safe OperationRead ALL Instructions Do not Remove Jammed Cutoff Pieces until blade has stopped Before Making a CUT, be Sure ALL ADJUST- Ments are SecureMeaning Safety and International SymbolsExtension Cords ElectricalElectrical Connection Grounding InstructionsSPM Glossary of Terms for WoodworkingUnpacking PIN Blade Loose PartsTools Needed Know Your Scroll SAW Mounting Scroll SAW to Workbench AssemblyClamping Scroll SAW to Workbench Clamp SAW Base Mounting Board WorkbenchDrop Foot AdjustmentsSquaring the SAW Table to the Blade Sawdust BLOWER/LIGHTZero Degree Stop Assembly Setting the Table for Horizontal or Bevel CuttingZero Degree Stop Table Lock Knob Bevel Scale Screw HEX NUTTension Installing BladesRelease BladeAdjusting Blade Tension Adjusting Drop FootCutting Procedures OperationON/OFF Knob with Variable Speed Removing Jammed MaterialAvoiding Injury Blade Information Choice of Blade and SpeedLock Post Lock Post On / OFF KnobStack Cutting Scroll CuttingInterior Scroll Cutting General Maintenance MaintenanceARM Bearings Motor BrushesProblem Cause Solution TroubleshootingRyobi TECHNOLOGIES, INC Extension Cord Caution

SC180VS specifications

The Ryobi SC180VS is a versatile and powerful scroll saw that stands out in the realm of woodworking tools. It is specifically designed to cater to both hobbyists and professionals, delivering precision and ease of use.

One of the most notable features of the SC180VS is its variable speed control, which allows users to adjust the blade speed from 400 to 1,600 strokes per minute. This functionality enables woodworkers to make intricate cuts on various materials, including wood, plastic, and even metal, by simply adjusting the speed to suit the specific project requirements. The ability to customize blade speed enhances control and reduces the chances of material splintering or burning.

The SC180VS comes equipped with a robust 1.2-amp motor that provides efficient power for cutting through different thicknesses of material. Whether you're working on detailed patterns or larger projects, this scroll saw is engineered to perform with reliability. The tilt table, which can be adjusted up to 45 degrees, further enhances versatility, enabling users to make bevel cuts with great precision.

Another standout feature is the easy blade-change mechanism. The SC180VS utilizes a tool-less blade changing system, which allows for quick and hassle-free swapping of blades. This is an essential characteristic when transitioning between different projects, as it minimizes downtime and keeps the workflow moving smoothly.

Safety is also a priority with the Ryobi SC180VS. The saw includes a transparent blade guard that not only protects users from potential hazards but also provides clear visibility of the cutting area. An integrated dust blower helps maintain a clean workspace by keeping sawdust away from the cutting line, ensuring improved accuracy during operation.

The compact design of the SC180VS makes it easy to store and transport, making it an ideal choice for both small workshops and mobile operations. Its stable base and heavy-duty construction ensure durability and reduce vibrations, providing a smooth cutting experience.

Overall, the Ryobi SC180VS is an exceptional scroll saw, combining innovative features, impressive technology, and user-friendly design. Whether you're a beginner or a seasoned woodworker, this machine promises to enhance your crafting experience while delivering exceptional results. With its blend of performance, speed control, and safety features, the SC180VS is a reliable addition to any woodworking toolkit.
Top Page Image Contents