Graco 332574D important safety instructions Maintenance, Air Motor Oiling, Task Schedule

Maintenance

Maintenance

Tools Required

The following tools are required to perform regular main- tenance on the gun.

•7/16 in. wrench

•1/2 in. wrench

•9/16 in. wrench

•5/8 in. wrench

•11/16 in. wrench

•3/4 in. wrench

•13/16 in. wrench

•5/64 in. allen key

•3/32 in. allen key (supplied)

•9/64 in. allen key (supplied)

•3/16 in. allen key (supplied with cutter assembly)

•1/2 in. deep well socket

•9/32 in. socket

•7/32 in. deep well socket

•5/16 in. nut drive (supplied)

Task	Schedule
Add Oil to Air Motor,	3-4 drops per 8 hours of
page 10	use
Replace Anvil, page 11	When surface is badly
	scored or does not cut
Replace Cutter Head,	When glass roving is no
page 12	longer cut cleanly (verify
	proper tension first)

Air Motor Oiling

1.Perform Pressure Relief Procedure found within the RS Gun and Cutter, Operation-Repair manual.

2.Engage trigger lock.

Choppers with air fitting:

3.Remove the air line and add 3-4 drops of air motor oil, Graco part 202659, into air fitting port.

ti21005b

Choppers without air fitting:

3.Rotate speed control until oil mark line is aligned with line on back plate of the cutter.

ti21010a

4.Add 3-4 drops of air motor oil, Graco part 202659, into oil hole on air motor

ti21001a

10 332574D