Hobart Welding Products HSW 25 manual Introduction, Installation, Specifications, Installing Tips

SECTION 3 − INTRODUCTION

3-1. Specifications

	AC Input	Work Capacity	Rated	Welder Dimensions			Weight
	Voltage	Combined	Output At
Model
	50/60 Hz	Thickness	50% Duty	Height	Width	Length
	1-Phase	Mild Steel	Cycle*
HSW 15, RSP 110	110	1/8 in	1.5 kVA	6 in	4-1/2 in	13 in	22 lb
		(3.2 mm)		(152 mm)	(114 mm)	(330 mm)	(10 kg)
HSW 25 ,RSP 220	220	3/16 in	2.5 kVA	6 in	4-1/2 in	16 in	30 lb
		(4.7 mm)		(152 mm)	(114 mm)	(406 mm)	(14 kg)

*Based on 10 second time period; means unit can weld for 5 seconds out of each 10 second time period.

Model		HSW 15, RSP 110			HSW 25, RSP 220
Tong Length	6 in	12 in	18 in	6 in	12 in	18 in
	(152 mm)	(305 mm)	(457 mm)	(152 mm)	(305 mm)	(457 mm)
Input Volts		110			220
Output Amps ±10%	5500	4500	3600	6750	5800	4850

	SECTION 4 − INSTALLATION
4-1. Installing Or Dressing Tips
A.	Installing Tips
		1	Threaded Tip
		2 Tip With Hexhead Screw
		3	Tong
		Coat threads with supplied heat
		sink compound and install tip onto
		tong. Do not overtighten.
	1	2	3
		OR
	Tools Needed:
	3/16 in	3
	9/16 in
			Ref. ST-800 155-B / Ref. ST-800 154

Return To Table Of Contents OM-715 Page 5