G1030Z2/G1030Z2P only:
a.Hook the top loop of the upper filter bags (fabric) over the upper bag sup- ports, as shown in Figure 22.
Figure 22. Attaching upper filter bag.
b.Tighten the upper bags to the col- lector using the strap and clamp kits shown in Figure 23.
Note: DO NOT force the clamp. If it will not close, choose the next notch over, then clamp in place.
Clamp
Figure 23. Upper collection bag secured.
14.Hook the clear collection bag on the hooks around the bottom of the collector to hold the bag in place for the next step.
15.Tighten the belt clamp around the narrow foam strip to seal and secure the lower col- lection bag (Figure 24).
Note: DO NOT force the clamp. If it will not close, choose the next notch over, then clamp in place.
Figure 24. Lower collection bag installed.
16.Insert the inlet over the impeller intake hole.
17.Secure the inlet in place with the Phillips head tap screw (Figure 25).
Figure 25. Installed inlet.
Model G0562Z/ZP, G1030Z2/Z2P (Mfg. 11/11+) |