Emptying/Replacing |
| Cleaning Canister |
Bags |
| Filter |
|
|
|
|
|
|
Replacement plastic lower collection bags are available through Grizzly as Model T20543. Replacement upper collection bags are avail- able for the Model G1030Z2/G1030Z2P as Model G5556.
To replace the collection bag:
1.DISCONNECT MACHINE FROM POWER!
2.Make sure you are wearing safety glasses and a respirator.
3.Release the belt clamp securing the collec- tion bag, then unhook the bag from the col- lector.
4.Securely close the top of the bag and safely dispose of it according to local and federal standards.
5.Install a new collection bag.
Model G0562Z/ZP, G1030Z2/Z2P (Mfg. 11/11+)
To clean the canister filter on the Model G0562Z/ G0562ZP, move the canister cleaning handle back and forth to free the trapped dust particles from the filter pleats (see Figure 58). The particles will fall into the collection bag.
The replacement canister for the G0562Z/ G0562ZP is the Model H5783, which can also be installed on the G1030Z2/G1030Z2P.
Figure 58. Canister cleaning handle directions.
NOTICE
The use of compressed air or liquids to clean the canister filter will damage the filtration pleats of the filter. Use ONLY the cleaning handle or, if necessary, a soft brush to clean the inside of the canister filter.