Makita 410 manual

1.When using this tool to collect dust into the dust bag

Installing hose

Attach the end of hose (the metal end) to the inlet. To attach it, align the protrusions on the inside of hose with the slots in the inlet, push the hose in and turn it clock- wise.

Switch action

This tool is equipped with a main switch and a sub-switch. To start the tool, both switches should be turned on.

Main switch:

To turn on the main switch, press the "ON" button. Press the "OFF" button to turn it off.

Sub-switch:

When the hose is attached to the inlet, the sub-switch is automatically turned on. When the hose is removed or loose, it is automatically turned off.

CAUTION :

For your own safety, do not defeat the sub-switch by holding it in the "ON" position with tape, etc.