2.When exhaustingdust from indoors to outdoors
Installing hoses
Attach one hose to the inlet and another hose to the outlet in the same manner as mentioned in page. 5.
CAUTION :
The total length of exhaust hose and suc- tion hose should be less than 10 meters ” (32 feet). Otherwise the tool may become cIogged.
MAINTENANCE
CAUTION :
Always be sure that the tool is switched’off and unplugged before attempting to perform inspectionor maintenance.
The tool will stop when the carbon brushes wear to a certain length. When this occurs, both carbon brushes should be replaced.
To maintain product SAFETY and RELlABlLITY, reparis, maintenance or adjustment including brush inspection and replacement should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.
7