2040

If you connect this dust collector to a Makita planer or planer-jointer, you can perform clean, dust-freeoperation. To do so, use shaving hoods.

CAUTION:

.When dust or shavings exhausted from the planer or planer-jointer are large or wet, run the planer or the planer-jointer under light load. Otherwise the tools may become clogged.

.The total length of exhaust hose and suction hose should be tess than the max.

length shown in the Table right. Other- wise the tools may become clogged.

Table
Max, length of hoses	For Model
	2004
20 m (66 feet)	2030

2.5 m (8.2 feet)

.These shaving hoods are for planing operation. You cannot use them for jointing opera- tion.

Dust bag

Part No. 166023-9

0 Flexible hose

2 m Part No. 191779-5

2.5m Part No. 191711-9 ( w i t h metal end)

5 m Part No. 191712-7

1 0 m Part No. 191713-5

0 Floor nozzle assembly	Hose joint
Part No. 122361-9	Part No. 191757-5

Can be used t o collect chips and sawdust on floor.

0 Joint 100 assemMy	Clamp 90
Part No. 122336-8	Part No. 191715-1

Can be connected w i t h other hood makes ( l o o @ )