Overload protector
The overload protector automatically cuts out to break the circuit whenever heavy work is prolonged. If this occurs, first turn off the main switch and unplug the tool. Then de- tach the hose and the inlet from the tool and remove the foreign matter clogging the fan. Now attach the inlet and the hose and press the restart button.
CAUTION :
Before pressing the restart button, always be sure to wait 20 seconds after the tool stopped.
Operation
Avoid using the tool with the end of hose buried in a pile of dust, or the tool may be- come clogged.
Emptying dust bag
Inspect the insides of the dust bag through the window.
When the dust bag is about 213 (twothirds) full, turn off the main switch and remove the dust bag from the tool. Unzip the fastener and empty the dust bag of i t s contents, tapping it lightly so as to remove particles adhering to the insides.
CAUTION :
Empty the dust bag of its contents before the dust bag is full, or the tool may be- come clogged.
6