Additional Safety Rules

14.Use extra care when cleaning on stairs.

15.Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present.

16.EXTENSION CORDS: Use only three-wire extension cords which have three- prong grounding-type plugs and three-pole receptacles which accept the tool's plug. Replace or repair damaged or worn cord immediately.

17.OUTDOOR USE EXTENSIONCORDS. When tool is used outdoors, use only extension cords intended for use outdoors and so marked.

18.Connect to a properly grounded outlet only. See Grounding Instructions.

19.AVOID UNINTENTIONALSTARTING. Be sure switch is OFF when plugging in.

20.GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded surfaces. For example; pipes, radiators, ranges, refrigerator enclosures.

VOLTAGE WARNING: Before connecting the tool to a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified on the nameplate of the tool. A power source with voltage greater than that specified for the tool can result in SERIOUS INJURY to the user - as well as damage to the tool. If in doubt, DO NOT PLUG IN THE TOOL. Using a power source with voltage less than the nameplate rating is harmful to the motor.

1.Always use protective goggles, a cap and mask when using as a blower.

2.Never point the nozzle at anyone in the vicinity when using as a blower.

3.Do not block cooling vents. These vents permit cooling of the motor. Block- age should be carefully avoided lest the motor burn out from lack of ventilation.

4.Do not fold, tug nor step on the hose.

5.Always switch off and wait for the fan to come to a complete stop before installing or removing the hose.

6.Never stick your hands into the inlet or outlet.