![](/images/new-backgrounds/1276207/27620783x1.webp)
Support information | 42 |
|
|
FCC WARNING: This equipment generates and can radiate radio fre- quency energy and if not installed and used correctly in accordance with our instructions may cause interference to radio communications or radio and television reception. It has been
If this equipment does cause or suffer from interference to/from radio or television reception then the following measures should be tried:
1.Reorient the receiving aerial (or antenna) or route the antenna cable of the receiver as far as possible from the 518 and its cabling.
2.Ensure that the receiver uses
3.Relocate the receiver with respect to the 518.
4.Connect the receiver and this product to different AC outlets.
5.If the problem persists contact your dealer.
EEC This product has been designed to comply with the limits set out in
EN55013 and EN55020C.
REMEMBER to switch all units off before changing any connections.
Cleaning
When cleaning the 518 bear in mind that the front of the unit is plastic, and the display panel and top surface are glass.
Disconnect the power cord before cleaning the unit.
Note Do not use abrasive cleaners on any part of the 518.
Maintenance & Service
The Meridian 500 Series of
In the unlikely event that your 518 fails to function correctly, it should be returned, in its original packing, to your Meridian dealer. In case of diffi- culty within the UK or USA please contact our sales and service offices shown on page 4.
Outside the UK: contact the importing agent for the territory. A list of
Meridian agents abroad is available from the above address.
No responsibility can be accepted for the 518 whilst in transit to the fac- tory or an agent and customers are, therefore, advised to insure the unit.
518 User Guide