Operation summary | 20 |
|
|
Memory
In Resolution Enhancement mode, 518 maintains a continuous memory of the DSP, Dither, Gain, In and Out settings for each source.
So, if you had determined that, e.g. CD should always use Gain 0dB but that Radio could always use Emphasis and +2dB, then 518 will remember these and automatically reconfigure itself for each source.
DSP
In addition to the DSP modes offered in Control Unit (see page 15),
Resolution Enhancement adds Bypass.
Bypass transmits all 24 bits on the input to the output without any processing.
Note When Bypass is chosen, all the other front panel keys are disabled.
Operation summary
On the 518 front panel
Key | Action |
Source | Selects Source or input |
Display | Cycle the display through: |
| Processing option with gain in dB |
| Dither option with gain in dB |
| Input/output choices with gain in dB |
| Sampling frequency and gain in dB |
| Blank |
DSP | Select main processing method: Bypass, |
| Gain, Emphasis, |
Dither | Select dither or noise shaper to be used |
In | Set number of input bits |
Out | Set number of output bits and consumer or |
| professional use of channel status |
s | Decrease volume/gain |
n | Increase volume/gain |
With the Remote Control
Source keys | Selects input depending on |
| customisation. |
Standby | Puts the 518 into the Standby |
| state. |
Clear | Autoconfigure (in Standby) |
w e | Access the Menus |
n s | Change the Menus |
Fn + Display | Change 518 Display |
Red n and s | Change the primary volume. |
Mute | Mutes output. |
518 User Guide
