Customising 518: overview

22

 

 

∙whether or not the Bypass DSP option is available.2

∙whether or not a blank display option is allowed.

∙whether or not the Emphasis DSP option is adaptive – i.e. reacts to the incoming emphasis status.

∙choices on how the volume control operates and displays.

Details of these are described in the next section.

Config: sources and inputs

In Config you can also make selections to do with sources, e.g.

∙how many inputs will be active

∙which sources you can select

∙which key on the remote control selects which source

∙the Logo for that input on the 518 display

∙the physical input connection to 518.

∙the Comms type of the source, i.e. whether it is a Meridian controllable source like CD or Radio

∙the address for that source product

How to customise 518

The 518 comes configured in Resolution Enhancement mode (Type 1) and needs no customising to become operational.

There are a very large number of different configurations possible. This section tells you how to change the configuration.

Customising, general procedure

518 has four operating modes (not to be confused with setup Types):

∙Normal

∙Standby

∙Type

∙Config

Normal and Standby are the everyday operating modes: the operating instructions refer to these.

Type and Config are used to make choices about the way 518 works. These are described in the section: ‘Configuring 518, an overview' on page 37.

How to change to Type or Config

To change to Type or Config you use the same basic procedure.

1.Switch off any power amplifiers that are connected to the system.

2.Switch off the 518 using the power switch on the back.

3.While pressing the specific key for the operating mode you want on the 518 front panel, switch the power on again.

518 will display a message to inform you which mode it is in.

4.Release the key

At this stage you can make the adjustments required.

In step 3, the front panel key is:

∙Type – press and hold Source.

∙Config – press and hold Display.

∙Normal – do not use any key!

2Bypass is not available if the 518 is the system volume control!

518 User Guide