Powermatic 75 instruction manual Maintenance, Stop and removing plug from power source

Page 10

MAINTENANCE

WARNING: Never perform maintenance ! on this machine before turning switch to

"stop" and removing plug from power source.

DUST BAGS

Each operator has his own particular application of woodworking machinery. As such, a maintenance schedule for the dust collector must be performed on a regular and timely basis. To remove dust and chips:

1.Disconnect machine from its power source.

2.Shake the upper dust bag and allow the fine dust to settle down into the lower chip bag.

3.Release the clamp around upper bag, remove the upper bag and deposit all remaining dust into a fire- proof metal container.

4.Release clamp around lower chip bag, remove the chip bag and deposit chips and dust into a fire- proof metal container.

5.Reconnect both sets of dust bags making sure the clamps firmly secure the bags to the upper and lower chute extensions.

10

Image 10
Contents Dust Collector Warranty & Service Table of Contents Safety Rules Page Safety Specifications Model 66, 10 Table Saw Receiving Installation and AssemblyBox contents Electrical ConnectionOperation All grounded, cord connected toolsMaintenance Stop and removing plug from power sourceTrouble-Shootingfor Model 75 Dust Collector Parts List Model 75 Dust Collector Description Quantity6286612 Model 75 Dust Collector Page 07/01