Cleaning the Canister Filter
Clean the canister filter frequently to keep the collector's performance at its optimum. To clean the filter, turn the handle a couple of rotations so the dust falls into the clear plastic bag. Properly discard the plastic collector bag when full.
Motor
Make frequent inspections of the motor fan and blow out (with low pressure air hose) or vacuum any accumulation of foreign material in order to maintain normal motor ventilation.
Grounding Instructions
1.For all grounded, cord-connected tools:
This tool must be grounded. In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an electric cord having an
WARNING: Improper connection of the
Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the tool is properly grounded.
2.For grounded,
120V supply circuit:
This tool is intended for use on a nominal 120V circuit, and has a grounded plug that looks like the plug illustrated Sketch A in Figure 14. The tool has a grounding prong that looks like the plug illustrated in Sketch A in Figure 14. A temporary adapter that looks like the adapter illustrated in Sketch B, may be used to connect this plug to a 2 pole receptacle as shown in Sketch C if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet (sketch A) can be installed by a qualified electrician. The
Figure 14
3.For all other grounded, cord-connected tools:
This tool is rated more than 15 amperes and is intended for use on a circuit having a nominal rating more than 120 volts, and is
14