Panasonic SC-HC55DB Input level, Display function, Hands-Free Profile HFP, Advanced functions

Input level

You can select the sound input level of the Bluetooth® device.

1 Press [ , iPod] repeatedly to select “BLUETOOTH”.

2 Press [SOUND] repeatedly to select “INPUT LEVEL”.

3 Press [2, 1] to select “0”, “i1” or “i2”.

≥Select “0” if the sound is distorted.

Display function

Press [DISPLAY] repeatedly to view the information of the current connected device.

BLUETOOTH	---------------------# Connected device name
^--------------------------	Connected profiles(------------------------	}

Hands-Free Profile (HFP)

This unit works as a Bluetooth® hands-free for your mobile phones.

To answer a call	Press [	]. “CALLING” starts blinking on
(“IN CALL” blinks)	the display (Talk into the unit’s
	microphone).
	Press [	] again to transfer the call to the
	mobile phones (“TRANSFER” blinks. You
	may now converse using the mobile
	phone).
To cancel a call	Press [	].
To adjust the	Press [+, VOL ,–] (Adjustable from
sound volume	“TEL VOL 1” to “TEL VOL 10”).
To mute the	Press [MUTE]. Press again to cancel.
microphone	(During “MIC MUTE”, the caller is not able
	to hear your voice).

≥This unit does not work with Headset Profile (HSP).

≥When the mobile phone is too close to the microphone of this unit, noise may occur. Always keep the mobile phone away from the microphone of this unit when making a call.

≥The audio from a disc will be paused while calling in hands-free mode.

Disconnecting a Bluetooth® device

1 Press [ , iPod] repeatedly to select “BLUETOOTH”.

2 Press [ MENU] to display “DISCONNECT?” and then press [OK].

A confirmation message is displayed.

3 Press [2, 1] to select “YES” and then press [OK].

≥The connection can also be stopped when you disable Bluetooth® transmission on the connected Bluetooth® device.

Advanced functions

Preparation

Press [ , iPod] repeatedly to select “BLUETOOTH”.

≥These functions are unavailable if a device is connected. Disconnect the Bluetooth® devices to display these functions.

∫To register more devices

1 Press [ MENU] repeatedly to select “NEW DEV.” and then press [OK].

≥The unit enters pairing mode and “PAIRING” starts blinking on the display.

2 While this unit is in pairing mode, access the Bluetooth® menu of the Bluetooth® device and execute a Bluetooth® search to find this unit (SC-HC55).

≥ If prompted for the passkey, enter “0000”.

∫To select communication quality

1 Press [ MENU] repeatedly to select “LINK MODE”.

2 Press [2, 1] to select the following modes and then press [OK].

MODE 1: Connection with emphasis on communication stability

MODE 2: Connection with high bit rate for good audio quality (Communication might easily be disconnected in this mode, select “MODE 1” if this occurs).

∫ To select Auto Link mode

1 Press [ MENU] repeatedly to select “AUTO LINK”.

2 Press [2, 1] to select the following modes and then press [OK].

ON: This unit will automatically select “BLUETOOTH” when a Bluetooth® device is connected.

OFF

≥ When “LINKING” is displayed, pressing [ MENU] is invalid. ≥ Auto Link works only if your device supports A2DP.

≥ The communication quality settings also depend on the settings on the connected device. If the communication quality of the connected device is set for stable communication, the quality of the audio will remain low even if this unit is set to “MODE 2”.

RQTX1267

18