Panasonic SC-HC55DB Checking the DAB signal reception quality, To re-Auto scan DAB stations

Checking the DAB signal reception quality

With this function it is possible to check the signal reception quality of a selected frequency.

If the reception quality is poor, try adjusting the antenna.

Preparation

≥Press [EXT-IN, RADIO] repeatedly to select “DABr”.

1 Press [RADIO MENU] repeatedly to select

“SIGNAL QUALITY”.

2 Press [2, 1] to select the frequency.

≥After displaying the frequency, the current reception quality is displayed.

Frequency

block Frequency

3 To continue checking the quality of other frequencies Press [2, 1] again and select the desired frequency.

To exit

Press [RADIO MENU].

≥If the antenna has been adjusted, perform Auto scanning and update the station memory. (> below)

To re-Auto scan DAB stations

When new stations are added or when the antenna has been moved, reperform the Auto scan.

1 Press [RADIO MENU] repeatedly to select “AUTOSCAN” and then press [OK].

2 While “START ?” is flashing,

Press [OK].

≥When updating the memory with Auto scan, preset stations will be erased. Preset them again (> right).

≥When a frequency is tuned using Auto scanning, the ensemble corresponding to the frequency is displayed for approximately 2 seconds.

≥Total stations received is displayed for approximately 2 seconds.

Listening to DAB stations

On this unit, there are 2 ways of selecting the desired station.

Preparation

≥Press [EXT-IN, RADIO] repeatedly to select “DABr”.

≥Make sure that the initial settings are made. (> 13)

To select by station (alphanumeric order)

Press [6] or [5] to select a station.

To select by preset

Press [:] or [9] to select a preset station.

≥Alternatively, press the numeric buttons to select the channel.

≥To select by preset, make sure that stations have already been preset

manually. (> below)

Presetting stations manually

You can preset up to 20 DAB channels.

Preparation

≥Press [EXT-IN, RADIO] repeatedly to select “DABr”.

1 Press [6] or [5] to select the station. 2 Press [PROGRAM].

3 Press the numeric buttons to select the channel.

≥You cannot preset stations when the station is not broadcasting or when the secondary service is selected.

≥The station occupying a channel is erased if another station is preset in that channel.

Listening to the secondary service

If the station is providing secondary service, “ ” will be displayed. It is possible to change between the primary and secondary service.

Preparation

≥While listening to the primary service.

1 Press [RADIO MENU] repeatedly to select “SECONDARY” and then press [OK].

2 Press [2, 1] to select the secondary service and press [OK].

≥The setting will go back to primary service when changes are made (e.g. frequency is changed).

RQTX1267

14