Using the Floor Stapler

Operation (continued)

THIS TOOL DOES NOT USE A SAFETY MECHANISM; extreme caution must be used whenever this tool is connected to an air supply. If the tool is dropped or if the Hammer Face (10) is accidentally struck, then the tool will fire a staple, potentially causing SEVERE PERSONAL INJURY.

1.	Connect the Floor Stapler to the air hose and turn on the	FIGURE 3
	air compressor.

Note: Before using on a floor, test the unit on a scrap piece of wood. Adjust the driving depth by providing more or less air pressure. Never exceed 100 PSI.

Warning! Keep your feet clear of the Stapler. Refer to FIGURES 1 and 3.

2.Hold the Arm (48) securely with one hand and grip the Hammer (49) with the other hand.

3.Make sure the Shoe (28) is over the staple target position.

Press down hard so that the Shoe (28) is firmly contacting the floor, and then strike the Hammer Face (10) with the Hammer (49) to drive out a staple. Lift the tool off of the floor.

4.Repeat the process until you are finished. Then, disconnect the Floor Stapler from the air source.

Warning! After disconnecting the Stapler from the air compressor, there could still be enough air pressure to fire the Stapler. After the air compressor hose is disconnected, always fire the Stapler repeatedly to make sure all of the air is expended

Troubleshooting

Note: Have the following problems repaired by a qualified service technician.

PROBLEM	CAUSE		SOLUTION
Air leaking in nose	1.	Loose Nose Screws	1. Tighten and recheck
	2.	Bumper is cracked/worn	2.	Replace Bumper

Lack of Power, slow	1.	Tool is too dry	1.	Lubricate
to cycle.	2.	Air Pressure is too low	2.	Check air supply equipment
	3.	Exhaust blocked	3.	Clean exhaust channel

Intermittent feeding	1.	Damaged pusher spring	1.	Replace Spring
or no fastener	2.	Wrong size staple	2.	Use correct size
coming out	3. Dirty magazine or wear-plate		3.	Clean magazine and nose

Jammed Staple	1.	Driver channel worn	1.	Replace wear plate
	2.	Driver is broken/worn	2.	Replace driver
	3.	Bent staples	3.	Use straight staples

REV 11/04

SKU 90399

For technical questions, please call 1-800-444-3353.

Page 6

90399 specifications

Harbor Freight Tools 90399 is a highly regarded tool known for its versatility and efficiency in various applications. Perfectly suited for DIY enthusiasts and professionals alike, this model boasts a range of features that make it a valuable addition to any tool collection.

One of the main attributes of the Harbor Freight Tools 90399 is its robust construction. Designed for durability and longevity, it is built with high-quality materials that withstand the rigors of frequent use. This ensures that users can rely on the tool for both light and heavy-duty tasks without concern for wear and tear.

The 90399 model is characterized by its ergonomic design, providing a comfortable grip that enhances user experience during prolonged operation. The tool's handle is designed to reduce fatigue, allowing users to work efficiently without sacrificing comfort. This feature is particularly beneficial in projects that require extended periods of use, as it helps maintain productivity while minimizing strain.

Another significant advantage of the Harbor Freight Tools 90399 is its intuitive design. The tool is easy to operate, making it accessible to beginners and experienced users alike. Its straightforward controls promote ease of use, which is crucial for achieving precision results, especially in detailed projects.

In terms of technology, the 90399 incorporates advanced mechanisms that enhance its performance. Whether used for cutting, drilling, or fastening, the tool’s functionalities are designed to provide maximum efficiency and accuracy. Additionally, its compact size allows for easy maneuverability in tight spaces, making it ideal for both indoor and outdoor applications.

The versatility of the Harbor Freight Tools 90399 is another notable feature. It can be utilized in a broad array of tasks, from home repairs and maintenance to professional-grade projects. This adaptability not only makes it a multifunctional tool but also an economical choice, as it can replace several specialized tools.

Users can also appreciate the tool’s low maintenance requirements. Its design minimizes the need for extensive upkeep, allowing users to focus on their projects rather than spending time on tool care. With its distinctive combination of durability, comfort, and versatility, the Harbor Freight Tools 90399 continues to be a favorite among various tool users, making it a smart investment for anyone seeking a reliable tool for a variety of tasks.

Operation (continued)