Makita BO4556, BO4558 Functional Description, Assembly, Switch action, Model BO4555 only

Page 4

FUNCTIONAL DESCRIPTION

CAUTION:

•Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool.

Switch action

1. Switch

1

008293

Repeat the same process for the other end of the base, maintaining the proper paper tension.

After inserting the paper, make sure the clamping part hold it securely. Otherwise the paper will be loose and subject to slippage, resulting in uneven sanding operation.

008302

CAUTION:

•Before plugging in the tool, always check to see

that the tool is switched off.

To start the tool, press the " I " side of the switch. To stop the tool, press the " O " side of the switch.

ASSEMBLY

1

2

3

008297

1.Punch plate

2.Sandpaper

3.Guide

CAUTION:

•Always be sure that the tool is switched off and unplugged before carrying out any work on the tool.

Installing or removing abrasive paper

008299

When using the dust bag, make holes in the abrasive paper using the punch plate as follows:

1.Set the tool upside down.

2.Place the punch plate over the abrasive paper so that the bent sides of the punch plate are flush with the paper edges.

3.Press the punch plate to make holes in the abrasive paper.

CAUTION:

•Be sure to remove the punch plate before operating the tool.

Model BO4555 only

NOTE:

Use Makita hook-and-loop sandpaper with this sander.

Open the paper clamp by raising on the lever to release from the locking port and then Insert the paper end into the clamping part, aligning the paper edges even and parallel with the sides of the base. (Bending the paper beforehand makes attachment easier). Once the paper is in place, return the lever to its original position.

2

1

008296

1.Velcro sandpaper

2.Base

1.Set the tool upside down so that the pad is on top.

2.Position the sandpaper to fit the shape of the base. Be sure to align the holes on the sandpaper with

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Finishing Sander Ponceuse orbitale Lijadora de acabado General Safety Rules SpecificationsEnglish Original instructions Specific Safety Rules SymbolsAssembly Switch actionInstalling or removing abrasive paper Functional DescriptionInstalling paper dust bag optional accessory OperationDust bag Sanding operationMaintenance AccessoriesMakita Limited ONE Year Warranty Warranty PolicyConservez CE Mode Demploi Français Mode d’emploi originalSpécifications Règles de sécurité généralesRègles DE Sécurité Particulières Symboles Description DU FonctionnementAssemblage AvertissementPour retirer le papier abrasif Modèle BO4555 uniquementAccessoires UtilisationEntretien Opération de sablageGarantie Limitée D’UN AN Makita Politique de garantieEspecificaciones Normas Generales DE SeguridadGuarde Estas Instrucciones Español Instrucciones originalesNormas Específicas DE Seguridad Advertencias y precauciones Servicio de mantenimientoDescripción DEL Funcionamiento SímbolosEnsamble AdvertenciaBolsa recolectora de polvo Colocación de la bolsa recolectora accesorio opcionalPara extraer el papel de lija Sólo para modelo BO4555Operación MantenimientoAccesorios Operación de lijadoPolítica de garantía Page Advertencia

BO4557, BO4558, BO4555, BO4556 specifications

The Makita BO4556, BO4555, BO4558, and BO4557 models represent a series of compact and powerful palm sanders designed to tackle a variety of sanding tasks. These sanders are particularly favored for their user-friendly operation and consistent performance, making them ideal for both professionals and DIY enthusiasts.

Starting with the BO4556, this model is equipped with a 2.0 AMP motor that delivers an impressive speed of up to 14,000 OPM (orbits per minute). Its ergonomic design includes a rubberized grip for comfort during extended use, reducing hand fatigue. The BO4556 features an easy-to-use clamp system for quick and effortless sandpaper changes. Its dust bag effectively captures debris, promoting a clean working environment.

The BO4555 shares many characteristics with the BO4556, maintaining a lightweight and compact design while also employing a 2.0 AMP motor. It includes an innovative through-the-pad dust collection system, which enhances dust extraction and visibility. Both models have a 1/4-inch sheet size and a durable, high-quality build that ensures longevity even in demanding work conditions.

The BO4558 takes it a step further with additional features such as a more robust dust collection system and an improved pad design. The design allows for greater efficiency, making it ideal for larger sanding tasks. With a similar motor capacity, the BO4558 boasts variable speed options to cater to different materials and applications, delivering precise control over sanding pressure.

Meanwhile, the BO4557 offers a slightly altered design with further enhancements in ergonomics and user comfort. The rubberized grip is designed to minimize vibrations, thus allowing for extended hours of work without discomfort. This model also emphasizes noise reduction, making it quieter during operation compared to its counterparts.

All four models are built with Makita's reliability and adherence to high-quality standards, making them suitable for a variety of applications, including furniture refinishing, drywall sanding, and automotive work. The combination of lightweight design, powerful performance, and easy maintenance ensures that these palm sanders are essential tools for achieving smooth, professional finishes. With Makita’s engineering excellence, the BO4556, BO4555, BO4558, and BO4557 stand out as top choices in the palm sander market.
Top Page Image Contents