Operation, Features, Requirements | Heath Zenith SL-5311 instruction

Professional

Motion Sensor Quartz

Security Light

Model SL-5311

Features

•Turns on lighting when motion is detected.

•Automatically turns lighting off.

•DualBrite® Timer.

•Photocell keeps the lighting off during daylight hours.

•LED indicates motion was sensed (day or night).

This package includes:

Cover Plate

Gasket

OPERATION

Mode:	On-Time:	Works: Day	Night
Test	5 Sec	x	x
Normal	1, 5, 20 min.		x
Manual	Until Dawn*		x

Accent	3, 6 Hr. to Dawn		x

* resets to Auto Mode at dawn.

Note: When first turned on wait about 1 1/2 minutes for the circuitry to calibrate.

TEST

Put ON-TIME switch ON-TIME DualBrite® on the sensor bottom

to TEST and the Dual-

Brite® switch OFF. TEST 1 5 20 Off 3 6 Dusk to Dawn

AUTO

Put the ON-TIME switch in the 1, 5, or ON-TIME20 minute position.

TEST 1 5 20

MANUAL MODE

	Halogen	6 Screws
	Halogen	(3 sizes)
	Bulb	(3 sizes)
Cover	Bulb
Cover
Plate
Sensor		3 Wire Nuts
		3 Wire Nuts
Light Control	S-hook

Requirements

• The light control requires 120-volts AC.

Manual mode only works at night because daylight returns the sensor to AUTO.

Flip the light switch off for one second then back on to toggle between AUTO and MANUAL MODE.

Manual mode works only with the ON-TIME switch in the 1, 5, or 20 position.

1 Second OFF

then...

... back on.

•	This fixture is designed for wall mounting only.
•	If you want to use Manual Override, the control must
	be wired through a switch.
• Some codes require installation by a qualified
	electrician.
•	This product is intended for use with the enclosed
	gasket and with a junction box marked for use in wet
	locations.
• The backplate has knockouts so the sensor can be
	mounted on most junction boxes.
•	In some applications a universal adaptor plate may
	be needed. Adaptors are available at Home Centers
	and Electrical Supply Stores.

Mode Switching Summary

TEST Move ON-TIME Switch to 1, 5, or 20 minutes

	AUTO	Flip light switch


		off for one second
		then back on*
MANUAL MODE		then back on*

*If you get confused while switching modes, turn the power off for one minute, then back on. After the cali- bration time the control will be in the AUTO mode.

DualBrite® TIMER

Light comes on half bright for selected time after dusk (Off, 3 hr., 6 hr., dusk to dawn). If motion is sensed, the light turns on full bright for the ON-TIME (1, 5, or 20 minutes) then returns to dim mode.

595-5497-12