Install Fixture Base to, Junction Box

It is also possible to wire two motion sensing lights so that either unit will turn on both lights at the same time(dualcontrolledsystem).Itisrecommendedthat only people with electrical wiring experience attempt this configuration. Please call our customer service number (1-800-858-8501) before attempting this wiring. If the dual controlled wiring is not done correctly, it can destroy both motion sensing fixtures and void your warranty.

Install Fixture Base to

DUAL	BRITE
DUAL		DUDASKWN
		DUDASKWN
3	6	TO
OFF			N
		10 MI
1	5ME
TESTON-TI

Sensor Lens

DualBrite®

DUSK

OFF 3HR 6HR TO DAWN

TEST 1 5 10 MIN

ON-TIME

Junction Box

1.Push wires into the junction box.

2.Slide light fixture base onto fixture screws and tighten decorative nuts snugly against the base.

3.Install four candelabra base light bulbs (25 Watts maximum each).

4.Refer to TESTING section before installing cover.

5.After switches are set and testing is complete, use the 2 decorative nuts to install the cover.

Junction Box

25 Watt Candelabra	Fixture Screw
25 Watt Candelabra
Base Bulb

DUAL	BRITE
DUAL		DUDASKWN
		DUDASKWN
3	6	TO
OFF			N
		10 MI	N
1	5	E
TESTON-TIM

Decorative Nut

Testing

1.Turn on the circuit breaker and light switch.

Note: Sensor has a 1 1/2 minute warm up period before it will detect motion. When first turned on wait 1 1/2 minutes.

2. Set the ON-TIME switch to the TEST position and the DualBrite® switch to the OFF position.

3.Walk through the coverage area noting where you are when the lights turn on. In TEST mode, light will stay on for only 5 seconds then turn off.

4.AdjusttheSENSITIVITYtoincreaseordecrease the range as needed. Too much sensitivity may cause false triggering due to heat sources in the coverage area (see Adjustment of Coverage Area or Troubleshooting section).

		SENSITIVITY
SEN+	SITIVITY–	+	–

5.Set the amount of ON-TIME you want the light to stay on after motion is detected (1, 5, or 10 minutes).

6.Set the amount of time you want the light to stay on in the Accent mode (Off, 3 hours, 6 hours, or dusk-to-dawn).

Note: Meets the ENERGY STAR® guidelines when DualBrite® function is off.

360°

8 ft. (2.4 m)

30 Feet (9.1 m) in all Directions

Maximum Range Coverage Angle* (Top View)

* Without lens shield installed.

598-1183-03

SL-4300 specifications

The Heath Zenith SL-4300 is a sophisticated and versatile motion-activated outdoor security light designed to enhance home safety while providing a range of convenient features. With an emphasis on reliability and functionality, the SL-4300 boasts several technologies that make it a preferred choice for homeowners seeking to enhance their outdoor lighting systems.

One of the standout features of the SL-4300 is its dual-head design, which allows for adjustable positioning of the light heads to illuminate various areas effectively. Each head can be pointed in different directions, ensuring maximum coverage of your outdoor spaces. This adaptability is crucial for monitoring large areas, such as driveways, patios, and gardens.

The motion detection technology employed by the SL-4300 is advanced and precise. It utilizes passive infrared (PIR) sensors to detect movement within a 180-degree field of view, offering a range of up to 30 feet. This ensures that any motion detected triggers the light, providing bright illumination to deter unwanted visitors and enhance safety during nighttime hours.

In terms of luminosity, the SL-4300 features energy-efficient LED bulbs that deliver substantial brightness while consuming minimal energy. The LED lights not only have a long lifespan, reducing the need for frequent bulb replacements, but they also lower electricity costs compared to traditional incandescent bulbs. With a luminous output that effectively lights up the space without harsh glare, the SL-4300 maintains a welcoming and secure atmosphere around the home.

Installation of the SL-4300 is simple, thanks to its user-friendly design. It comes with all the necessary mounting hardware and a clear instruction manual, making it accessible even for those with basic DIY skills. The unit is constructed from durable materials that can withstand varying weather conditions, ensuring longevity and consistent performance.

Another key feature of the SL-4300 is the adjustable timer and sensitivity settings. Users can customize the duration the light stays on after activation, ranging from a few seconds to several minutes. Additionally, sensitivity settings allow users to determine the threshold for triggering the light, which is particularly useful in reducing false alarms caused by animals or passersby.

In summary, the Heath Zenith SL-4300 is a state-of-the-art motion-activated outdoor security light that combines practical design elements, innovative technologies, and user-friendly features. With its superior motion detection system, energy-efficient LED lighting, adjustable settings, and durable construction, it stands as a robust solution for enhancing outdoor safety and security for any home.