Briggs & Stratton 13D1-(19) PPO, 13D1-19 manual Pump Maintenance and Repair Section E

Page 19

10 SERIES

OM−05463

 

 

PUMP MAINTENANCE AND REPAIR - SECTION E

MAINTENANCE AND REPAIR OF THE WEARING PARTS OF THE PUMP WILL MAINTAIN PEAK OPERATING PERFORMANCE.

STANDARD PERFORMANCE FOR PUMP MODELS 13D1−19

Based on 70_ F (21_ C) clear water at sea level with minimum suction lift. Since pump installations are seldom identical, your performance may be dif- ferent due to such factors as viscosity, specific gravity, elevation, temperature, and impeller trim.

If your pump serial number is followed by an your pump is NOT a standard production model. Contact the Gorman-Rupp Company to verify per- formance or part numbers.

Never tamper with the governor to gain more power. The governor establishes safe operating limits that should not be exceeded. The maximum continuous operating speed for this pump is 3600 RPM.

MAINTENANCE & REPAIR

PAGE E − 1

Image 19
Contents Models With Parts ListGORMAN-RUPP Company D MANSFIELD, Ohio Page Troubleshooting − Section D Table of Contents IntroductionSafety Section a Installation − Section BTable of Contents Introduction Safety − Section a Series Preinstallation Inspection Installation − Section BSuction and Discharge Piping Positioning PumpSuction Lines Recommended Minimum Suction Line Submergence vs. Velocity Discharge LinesSeries Operation Operation − Section CPriming StartingStopping Series Priming Prime Troubleshooting − Section DTrouble Possible Cause Probable Remedy Pump Stops or Preventive Maintenance Preventive Maintenance SchedulePump Maintenance and Repair Section E Pump Model 13D1−19 Section DrawingPump Models 13D1−19 From S/N 1259620 up Parts ListD1−19 Pump Parts Only 13D1−19 Pump Parts Only Pump and Seal Disassembly and Reassembly Series −855 Seal Assembly Lubrication GORMAN-RUPP Company GORMAN-RUPP of Canada Limited Extent and Duration of Warranty

13D1-(19) PPO, 13D1-19 specifications

The Briggs & Stratton 13D1-19,13D1-(19) PPO engine is a versatile power source known for its reliability and performance in various outdoor equipment applications. Designed primarily for use in lawnmowers, pressure washers, and other gardening machinery, the 13D1 series boasts features that cater to both consumer and commercial needs.

One of the standout features of the 13D1-19 engine is its compact design, which allows for easy installation in a variety of equipment types. This space-efficient construction is especially beneficial for manufacturers looking to create lightweight and maneuverable machines. The air-cooled, four-stroke engine configuration provides a balance between power output and fuel efficiency, making it an ideal choice for extended usage without the worry of overheating.

The 13D1-19,13D1-(19) PPO is equipped with a reliable carburetor system that ensures optimal fuel delivery and improved combustion efficiency. This contributes not only to better engine performance but also to reduced emissions, aligning with modern environmental standards. Furthermore, the engine features an efficient ignition system that offers quick starts, even in challenging weather conditions, ensuring that users can rely on it when needed.

Another notable characteristic is the engine's solid construction, featuring durable components designed to withstand the rigors of outdoor work. The low vibration design enhances user comfort during operation, reducing fatigue and allowing for longer working hours without discomfort. Additionally, the engine is designed for easy maintenance, featuring accessible parts for routine checks and repairs, which helps extend its lifespan.

The 13D1-19,13D1-(19) PPO also incorporates advanced technologies such as improved air filtration systems, which enhance performance by ensuring the engine operates with clean air. This reduces wear and tear on internal components, promoting a longer service life.

Overall, the Briggs & Stratton 13D1-19,13D1-(19) PPO engine is an excellent choice for those seeking a powerful, efficient, and reliable engine solution for a wide range of gardening and outdoor equipment. Its combination of durability, user-friendly features, and modern technology makes it a preferred option for both casual users and professionals in the landscaping industry.