Briggs & Stratton 13D1-(19) PPO, 13D1-19 manual Introduction

Page 5

10 SERIES

OM−05463

 

 

INTRODUCTION

Thank You for purchasing a Gorman-Rupp pump. Read this manual carefully to learn how to safely install and operate your pump. Failure to do so could result in personal injury or damage to the pump. This Installation, Operation, and Mainte- nance manual is designed to help you achieve the best performance and longest life from your Gor- man-Rupp pump.

This pump is a 10 Series, semi-open impeller, self- priming centrifugal model with a suction check valve. It is close-coupled to a single cylinder Briggs and Stratton gasoline engine. The pump is de- signed for handling dirty water containing speci- fied entrained solids. The basic material of con- struction for wetted parts is aluminum, with ductile iron impeller and steel wearing parts.

If there are any questions regarding the pump or its application which are not covered in this manual or in other literature accompanying this unit, please contact your Gorman-Rupp distributor, or write:

The Gorman-RuppGormanCompany-Rupp oforCanada Limited

P.O. Box 121770 Burwell Road

Mansfield, Ohio 44901St.−Thomas,1217 Ontario N5P 3R7

For information or technical assistance on the engine, contact the engine manufacturer’s local dealer or representative.

The following are used to alert maintenance personnel to procedures which require special attention, to those which could damage equipment, and to those which could be dangerous to personnel:

Immediate hazards which WILL result in severe personal injury or death. These instructions describe the procedure re- quired and the injury which will result from failure to follow the procedure.

Hazards or unsafe practices which COULD result in severe personal injury or death. These instructions describe the procedure required and the injury which could result from failure to follow the procedure.

Hazards or unsafe practices which COULD result in minor personal injury or product or property damage. These instructions describe the requirements and the possi- ble damage which could result from failure to follow the procedure.

NOTE

Instructions to aid in installation, operation, and maintenance or which clarify a procedure.

INTRODUCTION

PAGE I − 1

Page 4 Page 6
Image 5
Page 4 Page 6
Contents GORMAN-RUPP Company D MANSFIELD, Ohio With Parts ListModels Page Safety Section a Table of Contents IntroductionInstallation − Section B Troubleshooting − Section DTable of Contents Introduction Safety − Section a Series Preinstallation Inspection Installation − Section BSuction and Discharge Piping Positioning PumpSuction Lines Recommended Minimum Suction Line Submergence vs. Velocity Discharge LinesSeries Priming Operation − Section CStarting OperationStopping Series Priming Prime Troubleshooting − Section DTrouble Possible Cause Probable Remedy Pump Stops or Preventive Maintenance Preventive Maintenance SchedulePump Maintenance and Repair Section E Pump Model 13D1−19 Section DrawingPump Models 13D1−19 From S/N 1259620 up Parts ListD1−19 Pump Parts Only 13D1−19 Pump Parts Only Pump and Seal Disassembly and Reassembly Series −855 Seal Assembly Lubrication GORMAN-RUPP Company GORMAN-RUPP of Canada Limited Extent and Duration of Warranty

13D1-(19) PPO, 13D1-19 specifications

The Briggs & Stratton 13D1-19,13D1-(19) PPO engine is a versatile power source known for its reliability and performance in various outdoor equipment applications. Designed primarily for use in lawnmowers, pressure washers, and other gardening machinery, the 13D1 series boasts features that cater to both consumer and commercial needs.

One of the standout features of the 13D1-19 engine is its compact design, which allows for easy installation in a variety of equipment types. This space-efficient construction is especially beneficial for manufacturers looking to create lightweight and maneuverable machines. The air-cooled, four-stroke engine configuration provides a balance between power output and fuel efficiency, making it an ideal choice for extended usage without the worry of overheating.

The 13D1-19,13D1-(19) PPO is equipped with a reliable carburetor system that ensures optimal fuel delivery and improved combustion efficiency. This contributes not only to better engine performance but also to reduced emissions, aligning with modern environmental standards. Furthermore, the engine features an efficient ignition system that offers quick starts, even in challenging weather conditions, ensuring that users can rely on it when needed.

Another notable characteristic is the engine's solid construction, featuring durable components designed to withstand the rigors of outdoor work. The low vibration design enhances user comfort during operation, reducing fatigue and allowing for longer working hours without discomfort. Additionally, the engine is designed for easy maintenance, featuring accessible parts for routine checks and repairs, which helps extend its lifespan.

The 13D1-19,13D1-(19) PPO also incorporates advanced technologies such as improved air filtration systems, which enhance performance by ensuring the engine operates with clean air. This reduces wear and tear on internal components, promoting a longer service life.

Overall, the Briggs & Stratton 13D1-19,13D1-(19) PPO engine is an excellent choice for those seeking a powerful, efficient, and reliable engine solution for a wide range of gardening and outdoor equipment. Its combination of durability, user-friendly features, and modern technology makes it a preferred option for both casual users and professionals in the landscaping industry.
Top Page Image Contents